Know your Breville Ikon Cordfree Kettle
Operating your Breville Ikon Cordfree Kettle
Removable scale filter
Filters out scale deposits for cleaner water and prolongs element life
Premium quality brushed stainless steel
1.7 litre capacity
Fast boil 1500 watt concealed element
Features the unique Breville Assist Plug™. Easier to insert, easier to remove.
Cushion control lid
Viewing window in top of kettle
Lid release button
Soft grip handle
Illuminated water gauge
Illuminated power ‘on’ light
On/Off switch
Safety auto cut out and boil dry protection
Before first use
Remove any promotional material attached to your kettle. It is recommended that before the first use the kettle is filled to the maximum level, boiled and water discarded. Your kettle will only operate when positioned on the power base with the On/Off switch in the On position. The kettle will automatically switch off once the water has boiled.
Operation of your kettle
1.To fill the kettle, remove it from the power base and open the lid by pressing the lid release button. Fill with the desired amount of water. Always fill the kettle between the minimum and maximum marks on the water window. Too little water will result in the kettle switching off before the water has boiled.
2.Ensure that the lid is locked firmly into place. Place the kettle firmly onto the power base. Plug the power cord into 110V power outlet.
3.Press the On/Off switch to the ‘On’ position. The power ‘On’ light and the water guage will illuminate.
Always fill the kettle between the minimum (Min) and the maximum (Max) marks on the exterior of the kettle. Too little water will result in the kettle switching “Off” before the water has boiled. Filling above the maximum mark on the exterior of the kettle may result in boiling water splashing from the kettle.
Note
This kettle must only be used with the power base supplied. Use caution when pouring water from your kettle, as boiling water will scald. Do not pour the water too quickly.
Note
The kettle will automatically switch ‘Off’ once the water has boiled. Lift the kettle from the power base and pour the water. Take care to hold the kettle level, especially when filled to the maximum level. To
The kettle may be stored on its power base when not in use. Remove the power cord from the power outlet.
Safety boil dry protection
The kettle is fitted with a safety device, which protects against overheating should the appliance be operated with insufficient water. If this occurs the kettle will stop heating. Switch ‘Off’ at the power point and allow kettle to cool before refilling. The safety device will automatically reset when the kettle has cooled down.
For additional safety your kettle is fitted with an additional thermal cut out. In the event of overheating, the kettle will automatically shut down to prevent further damage. Should this occur, take your kettle to an authorised Breville Service Center.
Registered design.
Multi directional cordfree base with cord storage
THIS APPLIANCE IS DESIGNED FOR THE BOILING OF DRINKING QUALITY WATER ONLY, NEVER USE IT TO HEAT OR BOIL ANY OTHER LIQUIDS OR FOODSTUFFS. THE LID SHOULD ALWAYS BE FIRMLY IN PLACE AND LOCKED CLOSED BEFORE USE.
6 | 7 |