Emerson ES20 owner manual PRE-SETTING Stations in the Tuner Memory

PRE-SETTING STATIONS IN THE TUNER MEMORY

This system includes a 20 station preset memory. You can store up to 10 FM stations and 10 AM stations in the tuner memory for immediate recall. The procedure for storing stations in memory is as follows:

1.) Follow step 3 under “LISTENING TO THE RADIO” above to select the first station you wish to memorize.

Example: FM 103.5 MHz.

2.) W h e n t h e d e s i r e d s t ati o n appears on the display press the MEMORY/TIME ADJ. button on the front panel or the remote control. The MEMORY indicator flashes and Preset Memory Number 01 appears in the display.

3.) Press the MEMORY/TIME ADJ. button once more to enter your station in preset memory number 01.

4.) Tune to the next station you wish to memorize. When the desired station appears on the display press the MEMORY/TIME ADJ. button to start the MEMORY indicator flashing, and then press the REPEAT/PRESET button to select a different preset memory number.

(Each time you press the REPEAT/PRESET button the preset memory number display advances by 1.)

5.) Press the MEMORY/TIME ADJ. button again to enter the station in the selected preset memory number

6.) Repeat steps 4 and 5 until you have memorized up to 10 stations on the FM band, the press the STOP/BAND button to switch to the AM band and follow the same procedure to enter up to 10 stations on the AM band.

19

ES20_ib061303.p65 19

13/6/2003, 12:13