TP-Link TL-WA830RE manual To add a new device,  Note

TL-WA830RE300Mbps Wireless N Range Extender User Guide

Figure 4-3 WPS - Enabled

Operation Mode - Displays the current operation mode of the device.

WPS Status - To enable or disable the WPS function here.

Current PIN - The current value of the device's PIN is displayed here. The default PIN of the device can be found in the label or User Guide.

Restore PIN - Restore the PIN of the device to its default.

Gen New PIN - Click this button, and then you can get a new random value for the device's PIN. You can ensure the network security by generating a new PIN.

Disable PIN of this device - WPS external registrar of entering this device's PIN can be disabled or enabled manually. If this device receives multiple failed attempts to authenticate an external Registrar, this function will be disabled automatically.

Add device - You can add a new device to the existing network manually by clicking this button.

To add a new device:

If the wireless adapter supports WPS, you can establish a wireless connection between wireless adapter and device using either PBC (Push Button Configuration) method or PIN method.

Note:

To build a successful connection by WPS, you should also do the corresponding configuration of the network adapter for WPS function meanwhile. And as for the configuration of the network adapter, here takes the Wireless Adapter of our company for example.

Method One: Push the button of the Range Extender and Wireless Adapter

Step 1: Keep the “WPS Status” as Enabled and click the Add Device button in Figure 4-3,then the following screen will appear.

15