Clarion VB475 Setting the time, Protecting the player from theft, Removing the front panel

English

The player briefl y displays, “Bye Bye!” and enters its “standby” state. The player never turns off completely. If the clock display is enabled (the default), the player displays the current time prefaced by “AM” or “PM.”

Setting the time

In standby, you can set the time on the clock.

1.If the player is on, press the power button () to turn it off (go into standby mode).

2.Press and hold the D button on the player. The system displays the current time setting.

3.To switch between setting the hours and minutes, press the button again.

3.Press the next button ( )to increase the hours or minutes.

4.Press the previous button ( ) to decrease the hours or minutes.

NOTE

After five seconds of inactivity, the player exits time setup mode.

Protecting the player from theft

To discourage theft, detach the front panel, store it in the protective case provided, and take it with you.

Removing the front panel

1.Press the open button () in the upper left corner of the player to open the front panel.

Open button

Left side of the player

CAUTION

Do not grip the front panel buttons or use force to remove and install the front panel.

2.Holding the right side of the front panel, push the panel to the left to release the right pivot hinge.

12 VB475

VB475OwnersManual.indd 12

1/27/2007 9:34:27 PM