Installing the Unit in Cabinet

Route electric supply cord so that it can be plugged into receptacle after unit has been slid into place in cabinet.

Potential Personal Injury

lUse both hands to remove oven doors.

lGrasp only the sides of the oven door. Do Not use any portion of the front frames or trim for lifting.

Failure to properly grasp oven door could result in damage to product or personal injury.

The doors should be removed to decrease the weight of the oven and provide a better hand hold on the oven while lifting it into the cabinet.

A. TO REMOVE DOORS (See Illus.)

Use caution! Oven door is heavy.

1.Open door completely.

2.Depress finger tab in oven door hinge area. Push tab toward oven. Lift tab away from door liner and slide toward top of oven door.

3.Repeat step 2 for other side of door.

4.Close door until approximately 5 inches from fully closed position.

5.Slide door off the hinge arm assemblies.

6.Repeat steps 1 through 5 for other door on double ovens.

DOOR REMOVE

BE SURE THAT MICA SPACERS AT EITHER SIDE OF OVEN ARE IN PLACE TO PROVIDE PROPER AIR FLOW BETWEEN CABINET AND OVEN.

When oven has been placed into cabinet, the bottom trim strip is placed on the lower edge of the front frame. This is done by loosening the three screws at the bottom of the front frame. Place gas valve extension rod through hole in trim strip and slide strip under screw heads until the top edge of trim meets the lower corners of the front frame (see Illus.). Tighten screws to hold trim to front frame. Make sure that valve is turned to the full “on” position (pin straight and down).

FINGER TAB

Personal Injury Hazard

Securely fasten wall oven to cabinets using the screws provided (4 screws for a double oven or 2 screws for a single oven). Failure to do so could cause oven to move or tip during use and result in personal injury.

Secure oven to cabinet with #8 screws provided. Do not overtighten screws. Edge of front frame should be parallel to cabinet. Disregard any excess screws that are left after all screw holes in front frame have been used.

B. REPLACE OVEN RACKS IN OVEN CAVITY.

C. REINSTALL THE DOOR(S) (See Illus.)

1.Slide door hinge arms until firmly seated.

2.Lower door to full open position.

3.Push finger tabs to back. Depress the tabs and slide forward.

4.Close and reopen door slowly to make sure it has been replaced properly.

5.Repeat steps 1 through 4 for other door on double oven.

KGBS 146S, KGBS 246S specifications

The KitchenAid KGBS 246S and KGBS 146S are modern kitchen appliances that seamlessly blend style with functionality, catering to the needs of today's home cooks. Both models stand out for their advanced features and technologies, making them popular choices among cooking enthusiasts.

The KGBS 246S model boasts an impressive capacity with a 26-inch design, while the KGBS 146S offers a slightly smaller 14-inch option, suitable for compact kitchens or smaller households. These fridges are designed to efficiently store a variety of food items, ensuring that everything from fruits to leftovers remains fresh for longer.

One of the main features of both models is the advanced cooling technology. They utilize a dual cooling system, which operates independently for the refrigerator and freezer compartments. This technology not only maintains optimal humidity levels to keep fruits and vegetables crisp but also prevents the transfer of odors between the two sections.

Additionally, the KGBS line is equipped with an intuitive temperature management system. Users can easily set and adjust the temperature settings depending on the types of food being stored. This ensures food safety and preserves the freshness of ingredients. Both models also feature energy-efficient LED lighting, illuminating every corner and making it easy to find what you need without wasting energy.

In terms of design, the exterior of both KGBS models features a sleek stainless-steel finish that complements modern kitchens. Their fingerprint-resistant surface makes maintenance a breeze. The interior is thoughtfully designed with adjustable shelving and spacious door bins, accommodating various bottle sizes and facilitating organized storage.

Another notable characteristic is the quiet operation of both models. Equipped with advanced sound insulation, they ensure a tranquil kitchen environment, allowing users to focus on their culinary tasks without the distraction of loud noises.

In summary, the KitchenAid KGBS 246S and KGBS 146S are exemplary appliances that prioritize freshness, usability, and energy efficiency. Their advanced cooling technology, intuitive temperature management, sleek design, and quiet operation make them an excellent addition to any modern kitchen, ensuring that cooking and food storage become more enjoyable and efficient experiences.