SETUP menu
SETUP menu
From the SETUP menu, items shown in the table below can be performed.
Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table.
Item | Description | |
|
| |
| Using the ◄/► buttons corrects the vertical keystone distortion. | |
KEYSTONE | Shrink the bottom of the image ó Shrink the top of the image | |
• The adjustable range of this function will vary among inputs. For | ||
| ||
| some input, this function may not work well. | |
| Using the ▲/▼ buttons turns on/off the AUTO ECO MODE. | |
| ON ó OFF | |
AUTO ECO MODE | • When ON is selected, the projector will always be set to Eco mode | |
| at | |
| message “AUTO ECO MODE” will be displayed for a while when | |
| the projector starts with this function activated. |
| Using the ◄/► buttons switches ECO MODE. |
| ECO ó INTELLIGENT ECO ó NORMAL |
| • When the ECO is selected, acoustic noise and screen brightness |
ECO MODE | are reduced. |
• When INTELLIGENT ECO is selected, the brightness of the | |
| lamp changes according to the level of the input signal. The lamp |
| becomes brighter when the input signal level is high and darker |
| when the level is low. If dark images are projected continuously, the |
| brightness of the lamp may increase to maintain its performance. |
| • When AUTO ECO MODE (above) is set to ON, the projector will |
| always be set to Eco mode at |
(continued on next page)
41