Clarion installation manual DPX1001.2 Power System Amplifier

Page 10

DPX1001.2 Power System Amplifier

5.Add an external fuse on the amplifier’s positive (+) power lead and connect it as close as possible to the vehicle’s (+) battery terminal. Use a fuse rated to the total current consumption of the amplifier(s). Adding an external fuse will protect the electrical system from short circuits that can cause a fire.

6.Refer to Figure 6 when making electrical connections. Connect the amplifi - er’s positive (+) lead via a fuse directly to the positive (+) terminal on the battery. Do not connect this wire to the car’s fuse panel. Use red-insulated 10-gauge (or larger) wire for the amplifier’s positive (+) power lead and the same-gauge black-insulated wire for the ground.

7.When replacing the amplifier’s fuse, always use one having the same current rating. Substituting a higher-rated fuse or a slow-blow type can result in serious damage to the amplifier.

8.Never ground the speakers to the vehicle chassis or body.

9.Make sure that your vehicle’s electrical system (alternator, battery, etc.) is capable of handling the additional load. If you are planning a multi-amplifier system, you may need to add a second battery and possibly upgrade the alternator with a higher-output rated model. Consult your authorized Clarion dealer for recommendations.

10.To avoid noise problems, run the amplifier’s positive (+) power lead along one side of the vehicle to the battery. Run the remote turn-on wire and RCA audio cables down the center, and route the speaker wires along the remaining side. If wires must cross, run them perpendicular to each other.

11.When creating passage holes for the power wire, use grommets to eliminate any sharp edges created during drilling. This will protect the wire from being nicked and causing a short circuit.

12.Excess cable can cause signal loss and act as an “antenna” for noise. Use only high-quality RCA cables that are no longer than necessary to make a direct connection with the source unit or equalizer.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents E R a T IO N S T a L L a T IO N N U a L Table of Contents IntroductionAbout the Manual and Warranty DescriptionInput Connections and Audio Controls Low-pass Filter ControlsConnections for Power and Speakers Applications Channel Full Range, Satellite, or Subwoofer Stereo System Mixed-Mode Satellite and Subwoofer System Mounting Precautions InstallationWiring Precautions DPX1001.2 Power System Amplifier Electrical connections for the DPX1001.2 Setting the Crossover Setting the GainSetting the Bass Boost Troubleshooting Final System ChecksProduct Specs THDWarranty Information DPX1001.2 Rev /01

DPX1001.2 specifications

The Clarion DPX1001.2 is a high-performance digital amplifier designed to deliver superior audio quality in car audio systems. Known for its robust features and advanced technologies, this amplifier is a popular choice among audiophiles who demand exceptional sound clarity and power.

One of the standout features of the Clarion DPX1001.2 is its power output. This amplifier is capable of delivering an impressive 1000 watts of peak power, making it suitable for driving high-performance subwoofers and speakers. With a maximum RMS output of 500 watts at 1 ohm, it can provide clean, distortion-free audio even at high volumes. The ability to bridge channels also allows users to achieve a more powerful output, especially when pairing with compatible components.

The DPX1001.2 is equipped with a Class D topology, which is known for its efficiency and compact size. This design not only helps in reducing heat generation, but it also allows the amplifier to be lighter and more versatile in its installation. With an efficiency rating of around 85%, the amplifier ensures minimal power loss during operation, making it an ideal choice for those who want to maximize their system's overall output.

In addition to its powerful amplification capabilities, the Clarion DPX1001.2 includes a range of advanced sound processing technologies. The amplifier features adjustable low-pass filters and bass boost options, allowing users to customize their audio experience to suit their preferences. Additionally, the integrated thermal protection circuit helps prevent overheating, ensuring the amplifier remains operational even during demanding audio playback.

The build quality of the DPX1001.2 is another notable characteristic. It features a solid aluminum chassis that enhances durability and aids in heat dissipation. The amplifier also offers multiple connectivity options, including RCA inputs, making it easy to integrate into existing audio systems.

Overall, the Clarion DPX1001.2 stands out as a powerful and efficient digital amplifier, perfect for users looking to enhance their in-car audio experience. Its high power output, efficient Class D design, customizable sound options, and durable construction make it a favored choice for car audio enthusiasts. Whether you're looking to upgrade your current system or build a new one, the DPX1001.2 delivers performance and quality that can elevate any audio setup.
Top Page Image Contents