Clarion DPX1000.2 manual Troubleshooting, Final System Checks

Page 13

OWNER'S MANUAL

FINAL SYSTEM CHECKS

1.Start the engine and turn on the source unit. After a two-second delay,

slowly increase the Volume Control and listen to the audio. If you hear any noise, static, distortion or no sound at all, check the connections, and also refer to Troubleshooting. Depending on your system design, the levels may become quite loud even at low Volume Control settings. Until you get an “audio feel” of the system’s power, use care when adjusting controls.

2.Turn the Balance Controls to their extreme positions and listen to the results. Audio imaging should match control settings (audio from the left speaker when balance is left).

3.Increase the volume and verify that the amplifier reproduces audio (at full frequencies) without distortion. If you hear distortion, check the connections and verify that the Gain Control is set correctly. Another possibility is damaged speakers or under-powered speakers. Once again refer to Troubleshooting for additional help.

TROUBLESHOOTING

Problem

No Audio.

Solution

Low or no remote turn-on voltage. Check remote connections at amplifier and source unit.

Blown amplifier fuse. Replace with new fast-blow fuse (same rating).

Power wires not connected. Check battery and ground wiring at amplifier; also check battery connections.

Speaker leads shorted. Check speaker continuity to ground, it should not show a common ground.

Speakers not connected or are blown. Check speaker connections at amplifier, measure coil impedance.

Problem

Audio cycles on and off.

Solution

Thermal protection circuits are shutting amplifier off. Check location for adequate ventilation; consult an authorized Clarion Audio Dealer.

Problem

Distorted audio.

Solution

Gain is not set properly, or damaged speaker cones. Review Setting Gain; inspect each speaker cone for signs of damage (i.e. frozen cone, burning smell, etc.)

TROUBLESHOOTING

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Page Introduction About the Manual and WarrantyIntroduction Description Table of ContentsDescription Input Connections and Audio Controls ConnectionsConnections for Power and Speakers Applications ApplicationsChannel Full-Range, Satellite, or Subwoofer Stereo System Mixed-Mode Satellite and Subwoofer System Installation InstallationMounting Precautions Wiring PrecautionsWiring Electrical connections for the DPX1000.2 Setting the Crossover Setting the GainSetting the Bass Boost Troubleshooting TroubleshootingFinal System Checks DPX1000.2 Product SpecsPage DPX1000.2-10 Rev.1 02/01

DPX1000.2 specifications

The Clarion DPX1000.2 is a high-performance car amplifier designed to enhance your vehicle's audio experience. Known for its powerful output and innovative technologies, the DPX1000.2 is favored by audiophiles and casual listeners alike. With a compact design, it can be easily installed in various vehicle types, making it a versatile addition to any car audio system.

One of the standout features of the Clarion DPX1000.2 is its impressive power output. The amplifier delivers a continuous power of 1000 watts at 2 ohms, making it capable of driving subwoofers and speakers with high efficiency and clarity. It also offers a 500-watt output at 4 ohms, allowing flexibility in system design. This level of power ensures your music is reproduced with depth and intensity, creating an immersive listening experience.

The amplifier utilizes advanced Class D technology, which contributes to its high performance. Class D amplifiers are known for their efficiency, generating less heat and ensuring more of the power is utilized for audio output. This characteristic allows the DPX1000.2 to maintain consistent performance, even under demanding conditions.

Another key feature is its full-range capability, which supports a wide range of speaker types. This flexibility enables users to configure their audio system according to personal preferences and specifications. The adjustable high-pass and low-pass filters allow for optimal speaker integration, ensuring that every note is captured accurately.

The Clarion DPX1000.2 also includes a built-in bass boost feature that enhances low-frequency audio, perfect for those who love deep bass. Its signal-to-noise ratio is impressive, minimizing distortion and maintaining audio clarity across a range of volumes. Additionally, the amplifier is constructed with durable materials and features various protection mechanisms like thermal protection and short circuit protection, ensuring longevity and reliability.

In terms of aesthetics, the DPX1000.2 features a sleek and modern design, making it a stylish addition to your sound system. With its powerful performance, advanced technologies, and user-friendly features, the Clarion DPX1000.2 is a solid choice for anyone looking to upgrade their in-car audio setup, delivering exceptional sound quality and experience on the road.
Top Page Image Contents