KitchenAid KBFL25EVMS Replace Doors and Hinges, Remove and Replace Freezer Drawer Front

Page 6

2.Keep the refrigerator doors closed until you are ready to lift them free from the cabinet.

NOTE: Provide additional support for the refrigerator door while the hinges are being removed. Do not depend on the door gasket magnets to hold the door in place while you are working.

3.Starting with the right-hand side door, remove the parts for the top hinge as shown in Top Hinge graphic. Lift the refrigerator door from the bottom hinge pin.

NOTE: On some models, remove the shim from the bottom hinge pin and keep it for later use. See Bottom Hinge graphic.

4.Before removing the left-hand side door, disconnect the wiring plug located on top of the top hinge by wedging a flat-blade screwdriver or your fingernail between the two sections. See Wiring Plug graphic.

NOTE: The green, ground wire remains attached to the hinge.

5.Remove the parts for the top hinge as shown in Top Hinge graphic. Lift the left-hand side door from the bottom hinge pin.

NOTE: On some models, remove the shim from the bottom hinge pin and keep it for later use. See Bottom Hinge graphic.

Replace Doors and Hinges

1.Assemble the parts for the top hinge as shown in Top Hinge graphic. Do not tighten the screws completely.

2.Replace the parts for the bottom hinge as shown in Bottom Hinge graphic. Tighten screws. Replace the refrigerator door.

NOTE: Provide additional support for the refrigerator door while the hinges are being moved. Do not depend on the door gasket magnets to hold the door in place while you are working.

3.Align the door so that the bottom of the refrigerator door aligns evenly with the top of the freezer drawer. Tighten all screws.

4.Reconnect the wiring plug on top of the left-hand side refrigerator door.

5.Replace the top hinge covers.

Remove and Replace Freezer Drawer Front

IMPORTANT: Two people may be required to remove and replace the freezer drawer front. Graphics are included later in this section.

Remove Drawer Front

1.Open the freezer drawer to full extension.

2.Loosen the four screws attaching the drawer glides to the drawer front. See Drawer Front Removal graphic.

NOTE: Loosen screws three to four turns. Keep the screws in the drawer front.

3.Lift drawer front upward and off the screws. See Drawer Front Removal graphic.

Replace Drawer Front

1.Slide the drawer glides out of the freezer compartment. Insert the screws in the top of the drawer front into the slots in the drawer brackets. See Drawer Front Replacement graphic.

2.Pull the drawer brackets toward you to position the two screws in the bottom of the drawer front into the brackets. See Drawer Front Replacement graphic.

3.Completely tighten the four screws.

Final Steps

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

1.Plug in refrigerator to a grounded 3 prong outlet.

2.Return all removable door parts to doors and food to refrigerator.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Refrigerator Safety Refrigerator User InstructionsUnpack the Refrigerator Installation InstructionsClean Before Using Before You Throw Away Your Old Refrigerator or FreezerWater Supply Requirements Location RequirementsElectrical Requirements Recommended Grounding MethodConnect the Water Supply Remove and Replace Handles Complete the InstallationRefrigerator Doors and Drawer Remove Doors and HingesRemove Drawer Front Replace Doors and HingesRemove and Replace Freezer Drawer Front Replace Drawer FrontDoor Removal & Replacement Opening and Closing Doors Adjust the DoorsRefrigerator USE Style 1 Front and rear levelingUsing the Controls Crisper Humidity Control Ice MakerWater Dispenser CleaningRefrigerator Care Water Filtration SystemTroubleshooting Changing the Light BulbRefrigerator Operation Temperature and Moisture Ice and WaterWater dispenser will not operate properly Water Filter CertificationsOff-taste, odor or gray color in the ice Water is leaking from the dispenser systemProduct Data Sheets Application Guidelines/Water Supply ParametersItems Kitchenaid will not PAY for Kitchenaid Refrigerator WarrantyONE Year Limited Warranty Disclaimer of Implied Warranties Limitation of RemediesPage Instructions Dutilisation DU Réfrigérateur Sécurité DU RéfrigérateurInstructions D’INSTALLATION Exigences demplacementDéballage du réfrigérateur Spécifications de l’alimentation en eau Méthode recommandée de mise à la terreSpécifications électriques Pression de leauRaccordement de la canalisation deau Raccordement à une canalisation d’eauRaccordement au réfrigérateur Portes et tiroir du réfrigérateur Achever l’installationEnlèvement et réinstallation des poignées Enlèvement des portes et des charnièresEnlèvement de la façade du tiroir Remplacement des portes et des charnièresRéinstallation de la façade du tiroir Étapes finalesDépose et réinstallation des portes Ouverture et fermeture des portes Utilisation DU RéfrigérateurAjustement des portes Style 1-Nivellement avant et arrièreUtilisation des commandes Réglage de lhumidité dans le bac à légumes Mise en marche/arrêt de la machine à glaçons Machine à glaçonsDistributeur d’eau Taux de production des glaçonsEntretien DU Réfrigérateur Système de filtration de leauNettoyage Remplacement de l’ampoule d’éclairage Remplacement de lampoule du compartiment de réfrigérationRemplacement de lampoule du compartiment de congélation Dépannage Fonctionnement du réfrigérateurTempérature et humidité Glaçons et eau’eau coule du système de distribution Mauvais goût, odeur ou couleur grise des glaçonsLe distributeur deau ne fonctionne pas correctement Leau du distributeur est tièdeFeuilles DE Données SUR LE Produit Système de filtration d’eau intérieurGarantie DU Réfrigérateur Kitchenaid Garantie Limitée DE UN ANKitchenaid NE Prendra PAS EN Charge W10187309A SP PN W10187310A All rights reserved

KBFL25EVMS specifications

The KitchenAid KBFL25EVMS is a standout refrigerator that combines style, functionality, and innovative technology to enhance any modern kitchen. With its sleek design and robust features, this appliance is designed to meet the diverse needs of today’s households.

One of the primary characteristics of the KBFL25EVMS is its spacious interior. The refrigerator boasts a generous capacity that allows for efficient organization of groceries and other items. Its perfect installation depth ensures a seamless fit with standard kitchen cabinets, allowing for an integrated appearance that enhances the kitchen’s overall aesthetic.

The refrigerator is equipped with the ExtendFresh Temperature Management System, which helps maintain optimal temperatures throughout the interior. This technology prevents temperature fluctuations that can affect food freshness. This system includes a digital control that allows users to precisely monitor and adjust the temperature settings for both the refrigerator and freezer compartments.

Another notable feature of the KBFL25EVMS is its FreshChill Temperature-Controlled Drawer. This drawer provides additional storage options for meats and fish, allowing home cooks to preserve the quality of their ingredients. Moreover, it operates independently from the main refrigerator space, ensuring the ideal temperature for protein items.

In terms of organization, the KBFL25EVMS features adjustable shelves, which can be rearranged to accommodate larger items with ease. Additionally, the door bins are designed for easy access and can hold gallon-sized containers, maximizing storage efficiency.

The refrigerator also includes the Preserva Food Care System, which employs two independent cooling systems to keep odors from mixing between the refrigerator and freezer compartments. This is particularly beneficial for ensuring that fruits and vegetables retain their freshness longer, enhancing the overall food preservation experience.

Furthermore, the KBFL25EVMS comes with an exterior ice and water dispenser that offers the convenience of chilled water and ice at the touch of a button. The dispenser is positioned at a comfortable height, making it easy to fill various containers and drinkware.

Built with a commitment to quality and durability, the KitchenAid KBFL25EVMS embodies the brand's dedication to innovation and practical design. Its blend of advanced technology, ample storage solutions, and modern aesthetics makes it an excellent addition to any kitchen. Whether you're an avid home chef or simply seeking a stylish refrigerator to keep your groceries organized, the KBFL25EVMS delivers exceptional performance and functionality.
Top Page Image Contents