CASSETTE OPERATION
PLAYING CASSETTE TAPES
1.) Press the STANDBY/ON button to turn the system "On".
2.) Slide the FUNCTION selector to TAPE position to select the Tape mode.
3.) Press the Stop/Eject 
key of either deck A or deck B to open the cassette door.
4.) Insert a prerecorded cassette into the slots on the door with the exposed tape facing down and the full reel on the left side. Close cassette door.
5.) Press the Play 
key to begin playback.
6.) Adjust the VOLUME and EQ controls as desired.
7.) When the tape ends the Automatic Stop System releases the Play 
key and
shuts off the tape motor. Press the Stop/Eject 
key to open the cassette door and remove your tape. To stop the tape before it ends press the Stop/
Eject 
key at any time.
Fast Forward 
and Rewind 
Controls
Press 
or 
key to advance or rewind the tape rapidly. When you reach the
desired portion, or the end of the tape, press the Play 
key to resume normal
playback, or press the Stop/Eject 
key to shut off the tape motor.
Note: the Automatic Stop System does not function in the fast forward 
or
rewind 
modes.
22
MS9903TT_ib080503.p6522
5/8/2003, 11:44