Dell 1409X manual Adjusting the Projected Image, Raising the Projector Height

NOTE: If you press the Power button while the projector is running, the "Press Power Button to Turn off Projector" message appears on the screen. To clear the message, press the Menu button on the control panel or ignore the message; the message disappears after 5 seconds.

Adjusting the Projected Image

Raising the Projector Height

1 Press the Elevator button.

2 Raise the projector to the desired display angle, and then release the button to lock the elevator foot into position.

3 Use the tilt adjustment wheel to fine-tune the display angle.

Lowering the Projector Height

1 Press the Elevator button.

2 Lower the projector, and then release the button to lock the elevator foot into position.

1

DVI-D In	VGA - A	VGA - A	VGA - B	S-Video In	Video In	Audio In	Audio Out	USB	RS-232
	Out	I	I					Remote

	Dell 1409X
	2
3	3

1

2

3

Elevator button

Elevator foot

Tilt adjustment wheel

16

Using Your Projector