Preparation of Wall and TOP Cabinet

MOUNTING TEMPLATES

THIS PRODUCT CANNOT BE PROPERLY INSTALLED WITHOUT REFERRING TO THE MOUNTING INSTRUCTIONS FOUND ON BOTH TEMPLATES.

READ AND FOLLOW MOUNTING INFORMATION ON BOTH TOP CABINET AND WALL TEMPLATES

WALL AND TOP CABINET

I	personal Injury or property Dama* Hazard
	personal Injury or property Dama* Hazard
	The mounting area on the top cabinet and wall must be capable of supporting a minimum of127 pounds.	I
	Failure to follow these instructions could result in personal injury and/or property damage.	I

1.If the wall is not flat, use spacers to fill gaps. Mounting plates must be flat for proper installation.

2.Wall space for installation should be the same as the wall template. Make sure the top of the wall template is at least 66”from the floor and at least 30”from the cooking surface.

For proper rnstallation and servicing, the bottom of the Microwave Oven/Hood system should be at least 2”above the backsplash of the range.

NOW REFERTO THE WALL AND TOP CABINET TEMPLATES.

PRODUCT INSTALLATION

MOUNTING PLATES

Electrical Shock Harard

Ike special care when drilling holes into the wall.

EkXt&3lwirtZsnla)/beC%nlX&d llehindBlewaIcauwing. Contact with them could result in electrical shock

Separate toggle bolts from toggle nuts.

Insert one toggle bolt into each of the selected holes in the mounting plates (these holes correspond to holes in areas A, B, C and D ofthe Wall Template) and put the toggle nuts onto the toggle bolts (Fig, 10). If a hole is located in a stud, do not use a toggle bolt. Use a wood screw. If A, B, C, and D are not located in studs, follow template instructions for E and F.

Position the mounting plates with the toggle bolts attached atthewall locationand inserttoggle nutsand boltsthrough the holes in the wall with the toggle nuts closed. (Fig. 11). Use wood screws to attach mounting plate to studs.

NOTE: Before insertion, be sure you leave a space more than the thickness of the wall between the mounting plate and the end of each of the toggle nuts fin the closed position). If you do not leave enough space, the toggle nut will not be able to open on the other side of the wall. Also, once a toggle nut opens, it cannot be withdrawn from the hole, therefore make sure all toggles are in the correct position before insertion.

4.Align the mounting plates carefully and hold in position while tightening toggle bolts. Pull toggle bolt toward you and turn clockwise to tighten (Fig. 12).

Figure 10

Figure 11 - Wall

1435 specifications

The KitchenAid 1435 is a standout kitchen appliance, renowned for its versatility and innovative features that cater to both amateur and professional chefs. This powerful stand mixer is designed to make mixing, kneading, and whipping a breeze, making it an essential addition to any kitchen.

At the heart of the KitchenAid 1435 is its robust motor, which delivers a commendable performance of 300 watts. This powerful motor allows the mixer to tackle even the toughest doughs with ease, ensuring consistent results every time. Additionally, it operates quietly, making it comfortable to use even in busy kitchens.

One of the defining features of the KitchenAid 1435 is its 10-speed control system. This range of speeds provides users with the flexibility to handle a wide variety of mixing tasks, from gently folding ingredients at low speeds to whipping egg whites at high speeds. This versatility is enhanced by the inclusion of a range of attachments that come with the mixer, including a flat beater, dough hook, and wire whip, allowing for seamless transitions between different recipes.

Another notable characteristic of the KitchenAid 1435 is its innovative design. The tilt-head feature allows for easy access to the mixing bowl, making it simple to add ingredients or change attachments without the need to lift the entire unit. The 4.5-quart stainless steel bowl is not only durable but also dishwasher-safe, making cleanup a hassle-free experience.

The KitchenAid 1435 also includes a pouring shield, which is a thoughtful addition for those who want to prevent splatters and spills while pouring ingredients into the bowl. This ensures that your workspace remains tidy, whether you're mixing batter for a cake or kneading dough for bread.

In terms of aesthetics, the KitchenAid 1435 comes in a variety of colors, allowing consumers to choose a model that best fits their kitchen décor. This personal touch adds to the overall appeal of the mixer.

Overall, the KitchenAid 1435 combines powerful performance with thoughtful design and versatile attachments, making it a valuable asset in any kitchen. Whether you're baking a loaf of bread, whipping up a mousse, or preparing cookie dough, this stand mixer is equipped to handle it all, bringing efficiency and style to your culinary adventures.