KitchenAid Complete Manual for Microwave Oven: Cleaning Filters and Usage Instructions

Page 5

Microwave Oven Use

For list of preset programs, see the Quick Reference Guide provided with your model.

Manual Cooking/Stage Cooking

Touch COOK TIME, touch number pads to enter time, touch COOK POWER (if not 100%), touch number pads to enter power level (10-90), then touch the Start control.

If programming additional stages, enter the cook time and cook power of each before touching the Start control.

Sensor Cooking

A sensor in the microwave oven detects moisture released from food as it heats, and adjusts the cooking time accordingly.

Make sure microwave oven has been plugged in for at least

3 minutes. Use microwave-safe dish with loose-fitting lid, or cover microwave-safe dish with plastic wrap and vent. For optimal performance, wait at least 30 minutes after convection cooking or grilling (on some models) before sensor cooking.

Add More Time

At the end of any cycle, “ADD MORE TIME 0:00” appears in the display. Enter the additional time, if desired, and start the microwave oven. The cook power and/or temperature (on models with convection) for all non-sensor cycles will be the same as in the finished cycle, but may be changed. If Add More Time is used after a sensor cycle, the cook power will be 100%, but may be changed.

Keep Warm

WARNING

Food Poisoning Hazard

Do not let food sit in oven more than one hour before or after cooking.

Doing so can result in food poisoning or sickness.

Hot cooked food can be kept warm in the microwave oven. The Keep Warm function uses 10% cook power. Keep Warm can be used by itself or can be programmed to follow a cooking cycle. Opening the door during Keep Warm will cancel the function.

Microwave Oven Care

General Cleaning

IMPORTANT: Before cleaning, make sure all controls are off and the microwave oven is cool. Always follow label instructions on cleaning products.

To avoid damage to the microwave oven caused by arcing due to soil buildup, keep cavity, microwave inlet cover, cooking rack supports, and area where the door touches the frame clean.

Clean with mild soap, water and a soft cloth or sponge, or as indicated below.

Grease filter: mild soap and water or dishwasher.

Door and exterior: mild soap and water, or glass cleaner applied to paper towel.

Control panel: sponge or soft cloth and water.

Stainless steel cavity and exterior (on some models): mild soap and water, then rinse with clean water and dry with soft cloth, or use stainless steel cleaner.

Turntable: mild soap and water or dishwasher.

Rack(s) (on some models): mild soap, water and washcloth. Dishwasher cleaning is not recommended.

Steamer vessel (on some models): mild soap, water and soft brush or dishwasher.

Installing/Replacing Filters and Light Bulbs

NOTE: A filter status indicator (on some models) appears in the display when it is time to replace the charcoal filter, and clean or replace the grease filter. See “Settings” section to reset filter status.

Grease filters: Grease filters are on the underside of microwave oven. Clean monthly, or as prompted by filter status indicator. Slide the filter away from the tab area, and drop out the filter.

To reinstall, place end of the filter into the opening opposite the tab area, swing up the other end, and slide it toward the tab area.

Charcoal filter: The charcoal filter is behind the vent grille at the top front of the microwave oven. The charcoal filter cannot be cleaned, and should be replaced about every 6 months, or as prompted by filter status indicator. Remove two screws on the vent grille, tilt the grille forward, lift it out, and remove filter. To reinstall, place the filter into its slotted area – wire mesh side up, replace vent grille, and secure with screws.

Cooktop light: The cooktop light bulb is located on the underside of the microwave oven, and is replaceable. Remove bulb cover screw, and open the bulb cover. Replace bulb, close bulb cover, and secure with screw.

Cavity light: The cavity light bulb is located behind the vent grille at the top front of the microwave oven, under the bulb cover, and is replaceable. Remove two screws on the vent grille, tilt the grille forward, and lift it out. Open bulb cover and replace bulb. Close bulb cover, replace vent grille, and secure with screws.

5

Image 5
Contents W10272104A Important Safety InstructionsMicrowave Hood Combination Safety Important Safety Instructions Electrical Requirements SettingsGrounding Instructions Cookware and Dinnerware FeaturesAccessories Microwave Oven Care Microwave Oven UseReplacement Parts, Accessories and Cleaning Supplies TroubleshootingThis limited warranty does not cover Kitchenaid BUILT-IN Oven & Microwave WarrantySP PN W10272105A W10272104A
Related manuals
Manual 8 pages 26.63 Kb

W10272105A, KHMS2040BSS, W10272104A specifications

KitchenAid has long been a well-regarded name in the home appliance industry, known for its high-quality products that combine style and functionality. Among its offerings are the KitchenAid W10272104A, KHMS2040BSS, and W10272105A, each showcasing unique features and advanced technologies that cater to diverse culinary needs.

The KitchenAid W10272104A is primarily a microwave oven trim kit designed to provide a seamless built-in look for your microwave installation. This trim kit enhances the aesthetics of any kitchen by ensuring that the microwave integrates smoothly with surrounding cabinetry. The kit is compatible with select KitchenAid microwave models and features robust construction for durability. Its sleek stainless-steel finish complements modern kitchen designs, making it an excellent choice for those looking to maintain a cohesive style.

On the other hand, the KHMS2040BSS is a powerful over-the-range microwave that combines performance with convenience. This model boasts a 2.0 cubic foot capacity, providing ample space for a variety of dishes. It features a high-performance ventilation system that effectively eliminates smoke, steam, and odors, enhancing the overall kitchen experience. The microwave includes easy-to-use touch controls, a variety of preset cooking options, and sensor cooking technology, which automatically adjusts cooking times for optimal results. The stainless-steel finish not only ensures durability but also adds a sleek look to any kitchen.

The KitchenAid W10272105A is yet another versatile microwave trim kit, similar to the W10272104A, designed for a built-in microwave setup. It focuses on delivering both practicality and elegance. This trim kit is crafted to fit snugly with compatible KitchenAid microwave models, ensuring an attractive transition between the appliance and cabinetry. Both trim kits are designed to withstand cooking environments, prioritizing quality and functionality.

In summary, KitchenAid's W10272104A and W10272105A trim kits, along with the KHMS2040BSS microwave, highlight the brand's commitment to quality and innovation. Featuring advanced ventilation, user-friendly controls, and seamless design integration, these products not only enhance kitchen aesthetics but also elevate the cooking experience for any home chef. Whether you are renovating your kitchen or simply upgrading your appliances, these KitchenAid offerings provide essential features that combine form and function.