Installation Requirements, Tools and Parts

INSTALLATION REQUIREMENTS

Tools and Parts

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.

■ If you are installing the junction box on rear wall behind the

microwave oven, the junction box must be recessed and

located in the upper or lower right or left corner of the cabinet;

otherwise, the microwave oven will not fit into the cabinet

opening.

■ Microwave oven support surface must be solid, level and flush

Tools needed

■Phillips screwdriver

■Flat-blade screwdriver

■Measuring tape

■Level

■Drill (for wall cabinet installations)

■¹⁄₈" (3 mm) drill bit (for wall cabinet installations)

■1" (2.5 cm) drill bit (for wall cabinet installations)

with bottom of cabinet cutout. Floor must be able to support a

weight of 90 lbs (41.0 kg).

IMPORTANT: To avoid damage to your cabinets, check with your builder or cabinet supplier to make sure that the materials used will not discolor, delaminate or sustain other damage. This oven has been designed in accordance with the requirements of UL and CSA International and complies with the maximum allowable wood cabinet temperatures of 194°F (90°C).

Parts needed

■A UL listed or CSA approved conduit connector

■UL listed wire connectors

Parts supplied

AC D

A. Spacer bars (2)

B. Bottom vent (1)

C. ³⁄₈" hex washer head screws (4)

D. ¾" pan head screws (4)

Check local codes. Check existing electrical supply. See “Electrical Requirements.”

It is recommended that all electrical connections be made by a licensed, qualified electrical installer.

Product Dimensions

27" (68.6 cm) and 30" (76.2 cm) Microwave Ovens

D	C
D
27" (68.6 cm) models	30" (76.2 cm) models
A. 25⁵⁄₈" (65.1 cm) recessed width	A. 25⁵⁄₈" (72.7 cm) recessed width
B. 18⁵⁄₈" (47.3 cm) overall height	B. 18⁵⁄₈" (47.3 cm) overall height
C. 26³⁄₄" (68.0 cm) overall width	C. 29³⁄₄" (75.6 cm) overall width
D. 22³⁄₄" (57.8 cm) overall depth	D. 22³⁄₄" (57.8 cm) overall depth
E. 17¹⁄₄" (43.8 cm) recessed height	E. 17¹⁄₄" (43.8 cm) recessed height

27" (68.6 cm) and 30" (76.2 cm) Microwave Oven Spacer Kit

Location Requirements

IMPORTANT: Observe all governing codes and ordinances.

■Cabinet opening dimensions that are shown must be used. Given dimensions provide minimum clearance with microwave oven.

■Recessed installation area must provide complete enclosure around the recessed portion of the microwave oven.

■Grounded electrical supply is required. See “Electrical Requirements” section.

■Electrical supply junction box should be located 3" (7.6 cm) maximum below the support surface when the microwave oven is installed in a wall cabinet. A 1" (2.5 cm) minimum diameter hole should have been drilled in the left rear corner of the support surface to pass the appliance cable through to the junction box.

■For installation above single built-in oven the junction box must located inside upper cabinet.

27" (68.6 cm) models	30" (76.2 cm) models
A. 26³⁄₄" (67.9 cm)	A. 29³⁄₄" (75.6 cm)
overall width	overall width

NOTE: The microwave oven spacer kit will allow the microwave oven to be installed in a 17³⁄₈"-17³⁄₄" (44.1-45.1 cm) maximum cutout height.

A microwave oven spacer kit is available from your dealer that will allow the microwave oven to be installed in a 19"- 19¹³⁄₁₆"

(48.3-50.2 cm) maximum cutout height. Match the oven size to the following kits:

27" (68.6 cm) Stainless Steel - Model W10469901 30" (76.2 cm) Stainless Steel - Model W10469903

To order, see the “Assistance or Service” section of the Use and Care Guide.

W10351317A specifications

The KitchenAid W10351317A is a versatile and durable piece of kitchen equipment designed to enhance your culinary experience. This high-quality product is known for its robust construction and innovative features that cater to both amateur cooks and seasoned chefs.

One of the standout characteristics of the W10351317A is its impressive build quality. Made from premium materials, this product is engineered for longevity, ensuring that it can withstand the rigors of daily use. The sleek design not only enhances the aesthetics of your kitchen but also provides practical functionality, making it a seamless fit in any cooking environment.

A prominent feature of the W10351317A is its user-friendly interface. Equipped with intuitive controls, it simplifies the cooking process, allowing users to focus on creating exceptional meals without the hassle of complicated settings. This model also includes various speed settings and temperature controls, providing flexibility for a wide range of cooking tasks.

The KitchenAid W10351317A utilizes advanced technology to achieve consistent results. One such feature is the precision heating element that ensures even distribution of heat, eliminating cold spots and allowing for perfectly cooked dishes. This is particularly beneficial when preparing delicate items like soufflés or sauces that require precise temperature control.

Moreover, this kitchen appliance emphasizes versatility. It is designed to handle multiple cooking functions, from mixing and kneading to blending and chopping. This multi-functionality not only saves time but also reduces the need for additional kitchen tools, helping to keep your kitchen organized and clutter-free.

Easy maintenance is another key characteristic of the W10351317A. Many components are dishwasher safe, making cleanup a breeze. This feature is especially appreciated by busy cooks who want to spend more time enjoying their food rather than cleaning up.

In conclusion, the KitchenAid W10351317A stands out in the world of kitchen appliances due to its robust construction, user-friendly features, and advanced technology. Whether you are whipping up a quick meal or preparing an elaborate feast, this appliance can support all your culinary endeavors, making it an invaluable addition to any kitchen.