Before you start, Top view | KitchenAid 3184330 specification

Before you start...

Check location where hot water dispenser will be installed. Proper installation is your responsibility. Make sure you have everything necessary for correct installation. It is the responsibility of the installer to comply with installation specifications provided and with state and local plumbing codes.

Faucet mounting: requires a 1-l/l 6” to l-3/8” diameter opening in sink or countertop for mounting hot water dispenser faucet. Faucet can be installed in place of sink sprayer. For other installations, contact a qualified installer for best procedure to drill a hole through your type of sink or countertop. Thickness of sink or countertop hole must not exceed 3/4”.

Electrical Shock Hazard Special care must be taken when drilling holes into walls or water pipes. Electrical wires may be concealed behind the wall covering or water may remain in pipes.

Failure to follow this instruction could result in personal injury or death.

Personal Injury Hazard

Install faucet with lever to the side or behind spout.

Failure to do so may result in hot water scalding hand when operating lever.

NOTE:

This hot water dispenser is Not a water purifier. Some installations may require a filter (such as charcoal) for increased satisfaction.

Dimensions shown must be used.

Proper cold water supply connection must be available. (See “Watersupply requirements,” Panel B.)

Use saddle tapping valve supplied. Saddle tapping valve is designed for use with 3/8” to l- 3/8” outer dimension (O.D.), soft copper tubing (plain or chrome plated) or rigid metal pipe. Do Not use the saddle valve with flexible ribbed tubing. (See “Watersupply requirements,” Panels B.) Flexible ribbed tubing requires special connecting hardware available from your local plumbing

supply.

Grounded electrical outlet is required. (See “Electrical requirements,” Panel B.) Outlet should be located for easy connection to hot water dispenser. The outlet should be within 30” of hot water dispenser tank.

Property/Product Damage

l Contact a qualified installer or licensed plumber for the best procedure for cutting a faucet opening in your type of sink or countertop.

l Plumbing connections must comply with all sanitary, safety and plumbing codes.

l Do Not store or operate hot water dispenser below 32°F.

l Do Not use pipe sealing compounds. They may get inside dispenser and cause an unpleasant taste or smell.

l Dispenser must be filled with water and thermostat turned to “OFF” position before connecting to electrical power

supply-

Failure to follow these instructions may result in water damage to property or permanent product damage not covered by the warranty.

Water connections use compression fittings which do Not require sealing compounds to keep them

Top view

Important: Observe all governing ordinances.

from leaking.

codes and

Faucet mounted in existing -hc)le in sink.

install faucet with lever to the side or behind spout.

lever

spout

sink or countertop

hole

Cold water line

30” max.-electrical outlet to hot water dispenser tank.

Panel A

3184330 specifications

The KitchenAid 3184330 is a high-quality replacement part designed specifically for KitchenAid stand mixers. This essential component is known for its exceptional durability and compatibility, making it a popular choice among culinary enthusiasts and home bakers alike. Understanding its features and technologies can help users appreciate the advantages it brings to their kitchen.

One of the standout features of the KitchenAid 3184330 is its sturdy construction. Made from premium materials, it is designed to endure the rigorous demands of mixing, kneading, and whipping various ingredients. This robustness ensures that the part remains reliable over extensive use, providing consistent performance that users can count on.

Another notable characteristic is its precision engineering. The KitchenAid 3184330 is designed to fit seamlessly with a variety of KitchenAid stand mixer models. This compatibility extends to several series, allowing for a broader range of applications and ensuring that users can find the right match for their mixer. Its easy installation process further enhances user convenience, as it often requires no special tools.

In terms of technology, the KitchenAid 3184330 incorporates innovative design elements that enhance functionality. This includes features such as improved grip textures and user-friendly shapes that make handling and maneuvering the mixer easier during food preparation. Such thoughtful design considerations are crucial for ensuring a smooth mixing experience, allowing users to focus on their culinary creations.

Additionally, the KitchenAid 3184330 is designed with safety in mind. The materials used are often non-toxic and food-safe, aligning with modern kitchen standards. This reliability is essential for peace of mind in the kitchen, where food safety is a priority for every cook.

In conclusion, the KitchenAid 3184330 is more than just a replacement part; it embodies the dedication to quality and user satisfaction that the KitchenAid brand is known for. With its combination of durability, compatibility, thoughtful design, and safety features, this part is ideal for anyone looking to maintain their KitchenAid stand mixer in peak condition. Whether you’re whipping up a batch of cookies or kneading bread dough, the KitchenAid 3184330 is an essential tool that helps turn cooking inspirations into delicious realities.