Operating Instructions
Before First Use
Remove any packaging material and promotional labels before using your Kambrook Electric Teapot for the first time.
It is recommended that before first use, you fill the Kambrook Electric Teapot to the maximum level with cold tap water, bring to the boil and discard the water.
Your Kambrook Electric Teapot will only operate when positioned on the power base with the ON/OFF switch in the ‘ON’ position. Ensure the power plug is connected into a power point and switched on.
The Kambrook Electric Teapot will automatically switch ‘OFF’ once the water is boiled.
Operation of Your Kambrook Electric Teapot
1.To fill the Kambrook Electric Teapot, remove it from the power base and open the lid by pulling up. (see Fig. 1)
Fig. 1
Fill with the desired amount of water. Never fill the Kambrook Electric Teapot above the ‘MAX’ mark, which is indicated by the ‘MAX’ mark on the internal wall.
NOTE: Do not fill above the MAX mark as boiling water may splash out from the Kambrook Electric Teapot.
2.Add the tea leaves to the basket and place back inside the Teapot.
3.Ensure the lid is locked firmly into the Teapot before placing the Kambrook Electric Teapot on the power base.
4.Place the Kambrook Electric Teapot firmly onto the power base. Plug the power plug into 230V or 240V power outlet and switch ‘ON’.
5.Press the On/Off switch to the ‘ON’ position. The power ‘ON’ light will illuminate.
NOTE: Do not remove the Kambrook Electric Teapot from the power base during operation. Ensure the Teapot has switched off before removing the Teapot from the power base.
6.The Kambrook Electric Teapot will automatically switch ‘OFF’ once the water has boiled. Lift the Kambrook Electric Teapot from the power base and pour the water. Take care to hold the Kambrook Electric Teapot level, especially when filled to the maximum level. To
7.To refill tea, remove the lid from the Teapot and ensure that the basket has cooled down before removing. We recommend that you use tongs or oven mitts when removing.
8