Mellerware 29800 manual Using the machine for the first time, Program Instruction

CONSTRUCTION

Water Tank Cover	Funnel Cover
	Filter
Water Spout	Funnel
MAX	Handgrip
MIN
Water Tank	Valve
	Glass Jug
Body	Control Panel
	Display
Bottom Board

CONTROL PANEL

Please study these operating instructions before using the coffee maker, and keep it for future use.

Using the machine for the first time

Before making coffee you should use the coffee maker once with water only (without coffee or filter paper).

1.Insert the plug into the socket.

2.Fill the glass jug with cold water, open up the lid, and pour the water from the glass jug into the water tank, then close the lid to its original position.

3.Place the glass jug in its original position.

4.Note that the lid should be fitted securely.

5.Start the brewing process by pressing the on/off switch.

Program Instruction

1.Display Function: four digit 24 hours display, real time and pre-set timing. The red LED indicates that the appliance is in the heating condition, while the green LED indicates that the appliance is on timer standby. When the coffee maker is plugged into the wall socket, and both LED’s are off, the display will show the real time or any pre-set time.

2.Push Buttons

2.1Press Button “on/off”: The appliance will start to prepare coffee. The unit will turn off automatically

after 2 hours as a safety feature, and the LCD will show the real time. Press this “on/off” button when the green LED is on and it will cancel the pre-set time.

2.2“Auto” Button is the automatic on switch.

To pre-set the timer you must press the “pro” button twice and start to set the required time, then press the “pro” again to switch the appliance in standby mode (with green LED on). Pressing “auto” will cancel the pre-set timer program.

2.3“Pro” program setting

2.3.1Setting present time: plug in the appliance and the system will show 12:00. Press and hold the “pro” button for 3 seconds and the word “set time” will show on the top left of the LCD, then press “hr” to set hour and press “min” to set minute. Press and hold the pro button for 3 seconds again to exit the time setting.

If you do not, the pre-set time will be exit after 10 seconds. Unplugging the appliance will cancel the preset present time, and resetting the time will be required.

2.3.2Setting of timer: press the “pro” button twice to enter the “set timer” function, the word

“set timer” will show at the top right hand corner. Press “hr” button for hours setting and press “min” for minute setting. Press the “pro” button to confirm and press “auto” button to switch