Mellerware ICM00IA Troubleshooting Problem Possible Cause Solution, Warranty Information

Page 5

TROUBLESHOOTING

PROBLEM

POSSIBLE CAUSE

SOLUTION

 

 

 

 

“Add Water”

Little water in water

Switch off the ice maker, fill water, and

indicator is on.

reservoir.

press “ON/OFF” button again to restart

 

 

the unit.

 

 

 

 

“Ice Full” indicator

The ice basket is full.

Remove ice from ice basket. Replace the

is on.

 

empty ice basket immediately to prevent

 

 

the next batch ice bullets from falling

 

 

into the water reservoir.

 

 

 

 

Ice cubes stick

The ice making cycle is too

Stop the ice maker, and restart it when the

together.

long.

ice blocks melt. Select the small size ice

 

 

cube selection.

 

 

 

 

 

Water temperature in inner

Replace the water. Temperature of water

 

tank is too low.

recommended at 8-22 C.

 

 

 

 

Ice making cycle is

Room or water temperature

The room temperature should be 10-35 C,

normal but no ice

in inner tank is too high.

water temperature should be 8-22 C.

formed.

 

 

 

Refrigerant in cooling

Return product to service center to be

 

 

system may be leaking.

verified by a qualified technician.

 

 

 

 

 

Pipe in the cooling system

Return product to service center to be

 

could be blocked.

verified by a qualified technician.

 

 

 

 

WARRANTY INFORMATION

WARNING: Keep the ventilation opening of the appliance clear of obstructions and a minimum space of 10cm from surrounding walls and surfaces.

WARNING: Do not damage the refrigerant circuit.

-The warranty only covers defects in material or regular and proper use of the appliance.

-The repairs under warranty may only be carried out by an authorized service centre. When making a claim under the warranty, the original proof of purchase (with purchase date) must be submitted.

The warranty will not apply in cases of:

-Normal wear and tear.

-Incorrect use, e.g. overloading the appliance, use of different accessories.

-Use of force, damage caused by abuse and neglect.

-Damage caused by not following instructions as set out in this instruction manual.

-Partially or completely dismantled appliances.

The warranty will be rendered null & void if the appliance shows any signs of abuse, neglect, incorrect use of the appliance or any attempt to dismantle or repair the appliance.

MW_ICM001A_IM.indd 5

2012/09/04 11:37:23 AM

Image 5
Contents E a r g u a r a n t e e B a Getting to Know Your Unit GeneralPosition of Control Panel & Function Control Panel Operating Procedures & Maintenance Unpacking Your ICE Maker Safety AdviceUsing Your ICE Maker Connecting Your ICE MakerCleaning & Maintaining Your ICE Maker Warranty Information Troubleshooting Problem Possible Cause SolutionMWICM001AIM.indd 2012/09/04 113724 AM