Precautions for Products With Laser Devices

•System rack kits are intended to be installed in a Dell rack by trained service tech- nicians. If you install the kit in any other rack, be sure that the rack meets the specifications of a Dell rack.

•Do not move large racks by yourself. Due to the height and weight of the rack, Dell recommends a minimum of two people to accomplish this task.

•Before working on the rack, make sure that the stabilizers are secure to the rack, extend to the floor, and that the full weight of the rack rests on the floor. Install front and side stabilizers on a single rack or front stabilizers for joined multiple racks before working on the rack.

•Always load the rack from the bottom up, and load the heaviest item in the rack first.

•Make sure that the rack is level and stable before extending a component from the rack.

•Use caution when pressing the component rail release latches and sliding a component into or out of a rack; the slide rails can pinch your fingers.

•After a component is inserted into the rack, carefully extend the rail into a locking position, and then slide the component into the rack.

•Do not overload the AC supply branch circuit that provides power to the rack. The total rack load should not exceed 80 percent of the branch circuit rating.

•

Ensure that proper airflow is provided to components in the rack.

Do not step on or stand on any system/component when servicing other systems/components in a rack.

Precautions for Products With Modems, Telecommunications, or Local Area Network Options

Observe the following guidelines when working with options:

•Do not connect or use a modem or telephone during a lightning storm. There may be a risk of electrical shock from lightning.

•

Never connect or use a modem or telephone in a wet environment.

Do not plug a modem or telephone cable into the network interface controller (NIC) receptacle.

•Disconnect the modem cable before opening a product enclosure, touching or installing internal components, or touching an uninsulated modem cable or jack.

•Do not use a telephone line to report a gas leak while you are in the vicinity of the leak.

Precautions for Products With Laser Devices

Observe the following precautions for laser devices:

•Do not open any panels, operate controls, make adjustments, or perform proce- dures on a laser device other than those specified in the product’s documentation.

•Only authorized service technicians should repair laser devices.

vii

2400 specifications

The Dell PowerEdge 2400 is a server designed for small to medium-sized businesses seeking a reliable and efficient computing solution. Released as part of Dell’s robust lineup of PowerEdge servers, the 2400 stands out for its performance, scalability, and ease of management.

One of the main features of the Dell 2400 is its dual processor capability, allowing the system to support Intel Pentium III or Xeon processors. This multi-processor support is essential for organizations that require increased computing power and multitasking capabilities. With a maximum RAM configuration of up to 8GB, the server is well-suited for memory-intensive applications, making it capable of handling demanding workloads with ease.

The modular design of the PowerEdge 2400 allows for easy upgrades and maintenance. Administrators can conveniently access components such as hard drives, memory, and expansion cards, reducing downtime during hardware upgrades or replacements. It also supports a wide range of storage options, including SCSI, IDE, and RAID configurations, ensuring data integrity and redundancy.

In terms of connectivity, the Dell 2400 comes equipped with multiple Ethernet ports, enabling robust network integration. The server's support for a wide array of network protocols enhances its flexibility for various network environments, making it adaptable for evolving business needs.

The Dell PowerEdge 2400 incorporates advanced management technologies, notably the Dell Remote Access Controller (DRAC). This feature allows administrators to remotely manage and monitor the server, providing greater control and reducing the need for physical access to the hardware. The system’s management features enhance overall uptime and reliability, essential for mission-critical applications.

Compatibility with various operating systems, including Windows Server and Linux distributions, expands its usability across different environments. This broad compatibility ensures that businesses can leverage the server for diverse applications tailored to their specific needs.

Overall, the Dell PowerEdge 2400 is a comprehensive server solution characterized by its powerful performance, advanced management, and flexible configuration options. Its ability to adapt to a changing business landscape makes it a sound investment for organizations seeking a dependable computing platform.