14.Do not operate the appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner. Return the product to the nearest authorized service facility for examination, repair or electrical or mechanical ad- justment.
PRODUCT SPECIFICATION :
Voltage: 230V~50Hz
Power: 1000 W
Water capacity: 0.8L
HOW TO OPERATE YOUR KETTLE
It is important that you read these instructions before using your kettle for the first time.
1.Open the lid of the kettle by the plastic lid knob, fill with tap water to the desired level. (min. capacity is 0.5L and max. capacity is 0.8L). In hard water areas, using purified or filtered water is recommended to reduce the amount of scale buIld up in the kettle.
2.Close the lid by pressing it down until it clicks into place. Place the kettle on the base and plug into the mains.
3.To switch on the kettle, press the On/Off switch down (position 1). The power indicator light will now be on. When the water has boiled the kettle will automatically switch off. You can stop the kettle at any time by lifting the On/Off switch up (position 0).
4.Pour slowly and carefully. If you wish to
WARNING!
If the kettle has just boiled it will be full of steam that will escape if the lid is opened resulting in a burn hazard.
CAUTION!
Metal parts are hot and can cause injury. Handle plastic parts only.
IMPORTANT!
Do not open the lid when steam is coming out of the spout. When pouring or filling always remember to disconnect from electricity.
MW_EX22005B_siena mini v2_IM.indd 4
Note: If the kettle is switched on when empty or with insufficient water, then the kettle will switch off auto- matically to protect against dry boiling. Wait until the heating element cools down, refill with tap water and use as normal. This protection function is not designed for regular use, as it will shorten the life of the kettle.
If the kettle is overfilled, boiling water may be ejected. The kettle is only to be used with the stand provided. The appliance must not be immersed during cleaning.
If the supply cord is damaged, the manufacturer or its service agent or a similarly qualified person must replace it in order to avoid a hazard.
Descaling
Always ensure that the kettle is disconnected from the mains before descaling. Scaling or furring is a com- mon problem in hard water areas. It is recommend- ed that a propriety descaler is used whenever scale deposits build up. The instructions supplied with the descaler must always be followed. Scale build up may result in the kettle switching off before boiling and re- duce the life of the element. Using a water purifier will help to reduce scale
Ensure that you descale your filter at regular intervals to avoid impairing the pouring performance of your kettle.
Cleaning and Maintenance
A clean appliance will last longer. Please observe the following instructions to get the best use of your kettle.
•Always disconnect the plug from the mains before cleaning the kettle and base. Wipe the plastic parts and base with a moist cloth. Never use an ag- gressive scourer, steel wool or strong chemical clean- ers.
•Descale the kettle regularly. This will de- pend on the hardness of the water and the frequency of use. Scale build up will significantly reduce the heating efficiency of the kettle.
•Use of a proprietary descaler for kettles is recommended. Follow the instructions provided carefully.
•For stainless steel kettles you should use a soft absorbent cloth to remove the condensation from the body to prevent minerals in the steam/water from oxidizing and giving the appearance of rust marks on the kettle. A metal polish should be used to protect and maintain your kettle in a good condition.
Disposal and the Environment
If your electrical appliance requires replacement or is of no further use, please think of protecting the environment. Contact you local authority for advice as many have facilities for environmentally safe dis- posal.
10/15/2009 2:37:04 PM