Instructions for use Before use, Use, Cleaning

-Turn the tap of the beer keg to the “Open” position

-Close the lid (B).

-Do not use this device before operating any type of machinary or motorised vehicle.

-The beer expiry dates (printed on the keg) must be adhered to.

-Most kegs will not go “flat”, once opened, for up 30 days (depending on the type of keg).

-To obtain optimum cold temperatures, it is recommended that the keg is placed in the refrigerator before use.

-To obtain optimum pressure levels, it is recommended that the beer is consumed within 5 hours after opening the keg.

-Remember to open the tap on the keg before using the dispenser nozzle.

Instructions for use

Before use:

-Make sure that all of the product’s packaging has been removed.

-Ensure that the selected the voltage selector coincides with the mains.

Use:

-Extend the cable completely before plugging it in.

-Ensure that the electronic connector is properly attached to the appliance.

-Connect the appliance to the mains.

-Open the cover

-Insert keg

-Close cover

-Turn the thermostat control to the desired temperature position.

Practical recommendations:

-To speed up the cooling and start up of the appliance we recommend you buy previously cooled kegs of beer, or place your keg in the refrigerator prior to use in this appliance.

Once you have finished using the appliance:

-Stop the appliance; turn the power control/ switch to the 0 position.

-Unplug the appliance from the mains.

-Remove the keg of beer.

-Close the lid.

-Always clean the appliance after each use.

Cleaning:

-Once the appliance is switched off disconnected from the mains, allow it to cool before undertaking any cleaning task.

-Clean the equipment with a damp cloth with a few drops of washing-up liquid and then dry.

-Do not use harsh solvents, or products with

an acid or base pH such as bleach, or abrasive products for cleaning the appliance.

-Do not let water or any other liquid get into the air vents to avoid damage to the inner parts of the

appliance.

-Do not submerge the appliance in water or any other liquid, or place it under a running tap.

Anomalies and repair:

-Take the appliance to an authorized technical support service if problems arise. Do not try to dismantle or repair the appliance yourself, as this may be dangerous and will render the manufacturer’s guarantee void.

-If the connection to the mains has been damaged, it must be replaced and you should proceed as you would in the case of damage.

Ecology and recyclability of the product:

-The materials of which the packaging of this appliance consists are recyclable. Should you wish to dispose of them, use appropriate public waste containers for each type of material.

-The product does not contain concentrations of substances that could be considered harmful to the environment. Should you wish to dispose of the product once its working life has ended, take it to an authorised waste collection agent for recycling.

MW_BDM001_Beer Dispenser_IM.indd 5

2008/07/22 08:46:50 AM

BDM001 specifications

The Mellerware BDM001 is an exceptional appliance designed for those who appreciate quality, versatility, and efficiency in their daily kitchen routines. This premium blender stands out in the crowded market of kitchen appliances, combining advanced technology with user-friendly features that cater to both novice cooks and kitchen aficionados alike.

One of the main features of the Mellerware BDM001 is its powerful motor. With a robust 1200-watt motor, it can effortlessly blend, puree, and crush a variety of ingredients, from soft fruits to hard vegetables and ice. This makes it an ideal choice for preparing smoothies, sauces, soups, and even homemade nut butter. The efficiency of the motor is further enhanced by the high-speed stainless steel blades, which are designed to ensure maximum blending performance, resulting in consistently smooth textures.

Another notable characteristic of the Mellerware BDM001 is its versatile speed settings. The blender comes equipped with multiple speed options, allowing users to customize their blending based on the specific texture and consistency they desire. Whether you need a gentle mix or a high-speed blend, the flexibility of speed settings provides complete control over the blending process. Additionally, the device features a pulse function, enabling quick bursts of power for those times when precise control is required.

The design of the Mellerware BDM001 is both stylish and functional. Its sleek and compact design allows it to fit seamlessly into any kitchen countertop, while the BPA-free plastic jug ensures safety and durability. With a generous capacity of 1.5 liters, it is spacious enough to handle larger batches, making it perfect for families or entertaining guests.

Safety is also a priority with the Mellerware BDM001. The blender is equipped with an overload protection feature that prevents the motor from overheating, prolonging the life of the appliance. The non-slip feet ensure stability during operation, further minimizing the risk of accidents in the kitchen.

In summary, the Mellerware BDM001 is a powerful and versatile blender that combines advanced technology and thoughtful design. With features such as a high-performance motor, multiple speed settings, a generous capacity, and enhanced safety mechanisms, it is an excellent addition to any kitchen. This appliance not only meets the demands of everyday blending tasks but also enhances the overall cooking experience. Whether you’re making a quick smoothie or preparing a gourmet meal, the Mellerware BDM001 is equipped to handle it all with ease.