KitchenAid YKECD805H, YKECD865H warranty Using the vent system, Hot surface indicator light

Page 9

Using Your Cooktop

Using the surface units (cont.)

Hot surface indicator light

The hot surface indicator light in the lobe of each control will glow when a surface unit becomes too hot to touch. The indicator light will continue to glow as long as the surface unit is too hot to touch, even after it is turned off.

Using the vent system

The built-in vent system removes cooking vapors, odors, and smoke from foods prepared on the

cooktop.

• Turn the vent fan knob to the desired setting. You can set the vent fan between HI and LO.

wWARNING

Cut Hazard

Do not put hands into vent when fan or controls are on.

Doing so can result in serious cuts.

9

9

Image 9

Contents Use and Care Guide Thank you for buying a KITCHENAID* appliance On next Cooktop SafetyFor units with ventilating hood Models KECD805H and YKECD805H Control panel Parts and FeaturesUsing the surface units Using Your CooktopUsing the control knobs Surface unit heat settingsFor best results and greater energy Home canning informationCookware with non-stick finish has heating Check for rough spots on the bottom of metalUsing the ceramic glass cooktop Characteristics of cookware materialsHot surface indicator light Using the vent systemCleaning chart Part HOW to CleanCaring for Your Cooktop Type of Soil What to USE HOW to Clean How to keep your cooktop looking like newProblem Possible Cause Solution TroubleshootingIf you need assistance or service in the U.S.A Requesting Assistance or ServiceIf you need replacement parts For further assistanceIf you need service If you need assistance or service in CanadaTopic TOPICIndexSecond WarrantyThrough FIFTH-YEAR