Illuminite Lighting Hook-Up | Dual SBP10 manual

SBP10 INSTALLATION

Illuminite™ Lighting Hook-Up

Dual’s patent-pending Illuminite bulb system and control circuitry provide for extraordinary blue illumination, allowing for creative, color-coordinated installations. The interior of your vehicle will never sound or look ordinary again! Let your imagination take you there.

The lighting features of all Illuminite products require a 12V power source to operate. The speaker has two distinct sets of input terminals. The first is labeled "audio input" and the second is labeled "Illuminite lighting inputs". The inputs are clearly marked with a label positioned directly above the terminal housing. The polarity (+ and -) indicators for each set of inputs also appear on these labels.

1.Do not connect your amplifier or any audio source to the Illuminite inputs.

These inputs are designed for switched 12V DC power only. Do not connect directly to your battery permanently, as it will cause your battery to discharge.

Please use a switched 12V source.

2.See Fig. 1a, (illustrated wiring diagram) to be sure to maintain polarity. Be sure to connect to a switched 12 volt source. Proper connection would be the positive (+) 12V wire to the positive (+) Illuminite input terminal and the negative (-) Illuminite input terminal to a solid chassis ground.

DO NOT CONNECT AMP OR ANY AUDIO SOURCE TO ILLUMINATION INPUTS.

DAMAGE TO LIGHTS WILL OCCUR, AND WARRANTY WILL BE VOID!

Fig 1a

Lighting Hook-Up From Rear

From Amplifier

Ground	12 volt DC source

Illuminite Lighting
Input Terminals	Audio Input Terminals

Note: The SBP10 Illuminite lights are not removable. There are no serviceable parts inside or attached to the speaker assembly. The SBP10 is a sensitive electronic device. Removal of or tampering with any part of the speaker and/or its assemblies will damage the product and void the warranty.