Before using your dishwasher

1. Removing the packaging and controls:

•After unpacking, make sure that the dishwasher is undamaged and that the door closes correctly. If in doubt, contact a qualified technician or your local retailer.

•Keep the packaging materials (plastic bags, polystyrene parts, etc.) out of reach of children, as they are potentially dangerous.

•This dishwasher has been factory tested to ensure it functions correctly.

Such testing may leave slight water marks that will disappear with the first wash.

2. Water and electrical connections:

All water and electrical connections must be carried out by a qualified technician in compliance with the manufacturer's instructions (refer to the enclosed installation booklet) and current local safety regulations.

This appliance must only be used in the household for the prescribed uses.

Do not use this dishwasher if it has been damaged in transit. Consult your local retailer or our Customer Care Centre.

(Refer to the separate installation instructions booklet)

3. Water inlet and drain:

•Observe any special regulations issued by your local Water Board.

Water supply pressure: 0,3 - 1,0 MPa.

•Make sure the inlet and drain hoses are kink- free and are not crushed.

•If the hose length is not sufficient, please contact your local dealer or our Customer Care Centre.

•The inlet hose must be securely clamped to the water tap to prevent leaks.

•The inlet water temperature varies according to the model installed. Inlet hose marked “25°C

Max”: maximum temperature 25°C.

All other models: maximum temperature 60°C.

•When installing the appliance, make sure the drain water discharges correctly (if necessary, remove drain filter).

•After installation check leak tightness all water connections. Leaky connection can damage your home caused by flooding.

4. Electrical connection:

•Closely adhere to local Electricity Board regulations.

•Voltage information is shown on the rating plate mounted inside the door on the right hand side.

•The appliance must be grounded as prescribed by law.

•Do not use extension leads or multiple adapters.

•Before carrying out maintenance, disconnect the mains plug.

•If necessary, the power cable may be replaced with one the same obtained from our After- Sales Service via our Customer Care Centre. The power cable must only be replaced by a qualified technician.

EC Declaration of conformity

This appliance has been designed, constructed and distributed in compliance with the safety requirements of these EC Directives:

•the safety objectives of Low Voltage Directive 2006/95/EC (replacing 73/23/EEC and subsequent amendments);

•89/336/EEC

•93/68/EEC

Load capacity:

5 place settings according EN 50242.

KDIX 8810 specifications

The KitchenAid KDIX 8810 is a standout in the world of home kitchen appliances, setting a high standard for both performance and design. This innovative stand mixer is designed for avid bakers and culinary enthusiasts who value efficiency, versatility, and ease of use in their kitchen gadgets.

One of the main features of the KDIX 8810 is its powerful 1.3 horsepower motor. This robust motor is capable of handling heavy mixtures, making it perfect for kneading bread dough or whipping heavy cream. The mixer ensures that every task, whether light or heavy, is completed effortlessly. Additionally, the direct drive motor offers consistent power without the wear and tear that can come with other types of mixers.

The KDIX 8810 boasts a large 6-quart stainless steel bowl, allowing users to prepare larger batches of dough and batter. The bowl features an ergonomic handle for easy lifting and pouring, ensuring that transferring mixtures to baking pans is a breeze. Along with the bowl, the mixer is equipped with a wide range of attachments, including a flat beater, dough hook, and wire whip, providing versatility for various culinary tasks.

Features like the multipurpose attachment hub extend the mixer’s capabilities beyond simple mixing. Users can attach various KitchenAid accessories, including pasta makers, food grinders, and vegetable slicers, transforming the stand mixer into a multifunctional kitchen workhorse.

The KDIX 8810 is engineered with advanced technologies that enhance performance and ease of use. One such feature is the tilt-head design, which allows for easy access to the bowl and attachments, making it simple to add ingredients during mixing. The 10-speed control provides precision when it comes to mixing, from gentle folding to intense kneading, ensuring optimal results for every recipe.

Another highlight of this model is the proprietary planetary mixing action. This technology enables the beater to spin in one direction while the entire mixer head rotates in the other, ensuring that all ingredients are thoroughly mixed.

Built to last, the KDIX 8810 combines durable construction with an alluring design. Available in various colors, it not only performs exceptionally well but also enhances the aesthetic appeal of any kitchen. With its combination of power, versatility, and style, the KitchenAid KDIX 8810 stands as an essential tool for modern home chefs and bakers, facilitating creativity and efficiency in the kitchen.