KitchenAid KUDI01FL manual Cycle Selection Charts, Canceling a Cycle, Changing a Cycle or Setting

Cycle Selection Charts

Select the wash cycle and options desired. Or press START to repeat the same cycle and options as the previous cycle.

NOTE: If the last cycle you completed was a rinse cycle, the dishwasher will run the last full wash cycle and options that you selected when you press Start.

■If the power is off or the door is open for an extended period of time, the Start button memory will default to the Normal cycle with heated drying.

■If you do not run the dishwasher daily, close the door to maintain memory.

A “●” shows what steps are in each cycle.

Temperatures indicate where extra heat is added. Water usage is shown in U.S. gallons/liters.

This model meets the ENERGY STAR® guidelines for energy efficiency.

Cycle time includes dry time. An asterisk ( * ) by the cycle time indicates the cycle time might be longer depending on the temperature of the water entering the dishwasher. The cooler the water, the longer the cycle time. If the water is already hot enough, the cycle time will be as shown.

		Use this cycle for
		heavily-soiled pots,
		pans, casseroles,			Use both detergent
		regular tableware and
		harder than normal			dispenser sections.
		water conditions.
Pre-	Main	Rinse	Rinse	Final	Dry	Time	Water
Wash	Wash			Heated		(min)	Usage
				Rinse			(gal/L)
●	●	●		●	●	89*	6.9/26
130°F	140°F			140°F
(54°C)	(60°C)			(60°C)
		Use this cycle for loads
		with normal amounts of
		food soil. (The energy-			Use both detergent
		usage label is based on
		this cycle.)			dispenser sections.
Pre-	Main	Purge†	Rinse	Final	Dry	Time	Water
Wash	Wash			Heated		(min)	Usage
				Rinse			(gal/L)
●	●	●		●	●	79*	5.9/22.3
	120°F			140°F
	(49°C)			(60°C)

	Use this rinse cycle for
	rinsing dishes, glasses,
	and silverware that will
	not be washed right			Do not use detergent
	away.			with this cycle.
Pre-	Rinse Main	Rinse	Final	Dry	Time	Water
Wash	Wash		Heated		(min)	Usage
			Rinse			(gal/L)
		●			10	1.8/7

†A small amount of water is run through the pump to remove soil particles between the main wash and final rinse.

Canceling a Cycle

1.Carefully open the door slightly to stop the cycle. Wait for the spraying action to stop before opening the door to access the control panel.

2.Press

Cancel glows.

3.Close the door. The dishwasher starts a 2-minute drain (if needed). Let the dishwasher drain completely.

To stop the drain

You can press CANCEL again to stop the drain. Remember to drain the dishwasher before starting a new cycle.

To clear the indicators

Press CANCEL before starting the dishwasher to clear all options and cycles.

Changing a Cycle or Setting

During the first minute of a cycle

1.Open the door.

2.Press a new cycle and/or options.

3.Check the detergent dispensers. They must be filled properly for the new cycle.

4.Close the door. The dishwasher resumes the new cycle and/or option after a 5-second pause.

After the first minute of a cycle

1.Carefully open the door slightly to stop the cycle. Wait for the spraying action to stop before opening the door to access the control panel.

2.Press

Cancel glows.

3.Close the door. Your dishwasher starts a 2-minute drain (if needed). Let the dishwasher drain completely.

4.Select a new cycle and/or options.

5.Press START.

6.Check the detergent dispensers. They must be filled properly for the new cycle.

7.Close the door.

11