KitchenAid W10086190 Cooktop USE, CooktopControls, To Set, Power failure, Setting Recommended USE

Page 8

COOKTOP USE

CooktopControls

WARNING

Fire Hazard

Do not let the burner flame extend beyond the edge of the pan.

Turn off all controls when not cooking.

Failure to follow these instructions can result in death or fire.

IMPORTANT: Your cooktop is factory-set for use with Natural Gas. If you wish to use LP Gas, an LP Gas Conversion Kit is included with your new cooktop. See the instructions included with the LP Gas Conversion Kit for details on making this conversion.

Electric igniters automatically light the surface burners when control knobs are turned to LITE.

To Set:

1.Push in and turn knob counterclockwise to LITE.

All surface burners will click. Only the burner with the control knob turned to LITE will produce a flame.

2.Turn knob to anywhere between HI and LO. Use the following chart as a guide when setting heat levels.

SETTING

RECOMMENDED USE

 

 

 

Lite

■

Light the burner.

 

 

 

Hi

■

Start food cooking.

 

■ Bring liquid to a boil.

 

 

 

Medium High

■

Hold a rapid boil.

Between Med & Hi

■

Quickly brown or sear food.

 

 

 

 

Med

■

Fry or sauté foods.

Medium

■

Maintain a slow boil.

 

 

■ Cook soups, sauces and gravies.

 

 

 

Medium Low

■

Stew or steam foods.

Between Med & Lo

■

Simmer.

 

The large burners (17,000 Btu/h [British Thermal Units] and 12,500 Btu/h) provide the highest heat setting, and are ideal for cooking large quantities of food or liquid, using large pots and pans. The small burners (9,100 Btu/h and 6,000 Btu/h) allow more accurate simmer control at the lowest setting, and are ideal for cooking smaller quantities of food, using smaller pots and pans.

Lo

■ Keep food warm.

 

 

REMEMBER: When cooktop is in use, the entire cooktop area may become hot.

Before setting a control knob, place filled cookware on the grate. Do not operate a burner while using empty cookware or without any cookware on the grate.

NOTE: Visually check that the burner has lit. If the burner does not ignite, listen for a clicking sound. If you do not hear the igniter click, turn off the burner. Check for a tripped circuit breaker or blown household fuse.

Check that the control knob is pressed completely down on the valve shaft. If the spark igniter still does not operate, call a trained repair specialist.

Proper grounding and polarity are necessary for correct operation of the electric ignition system. If the wall receptacle does not provide correct polarity, the igniters will become grounded and occasionally click, even after the burner has ignited. Contact a trained repair specialist to check the wall receptacle to see whether it is wired with the correct polarity.

Power failure

In case of prolonged power failure, the surface burners can be lit manually. Hold a lit match near a burner and turn knob counterclockwise to LITE. After burner lights, turn knob to setting. Do not use a grill or griddle accessory during a power failure, as the vent fan will not operate.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents GAS Cooktop Table of Contents Table DES MatièresCooktop Safety Your safety and the safety of others are very importantImportant Safety Instructions Cooktop Parts and FeaturesModel KGCV566 36 91.4 cm shown Control Panel Left front burner control knob Left rear burner control knob Control Panel Power failure Setting Recommended USECooktop USE CooktopControlsTo Clean SealedSurfaceBurnersSurfaceGrateswithLocatorPin Surface GratesCookware Characteristics CeramicGlassSurfaceHomeCanning CookwareGeneralCleaning Cooktop CareTroubleshooting Surface BurnersInCanada Assistance or ServiceIntheU.S.A Kitchenaid Cooktop Warranty ONE Year Limited WarrantyItems Kitchenaid will not PAY for Disclaimer of Implied Warranties Limitation of RemediesSécurité DE LA Table DE Cuisson Votre sécurité et celle des autres est très importanteConservez CES Instructions Table de cuisson Modèle KGCV566 36 91,4 cm illustré Tableau de commandePièces ET Caractéristiques Plaque signalétique des numéros de Table de cuisson Commandesdelatabledecuisson Réglage Utilisation RecommandéeUtilisation DE LA Table DE Cuisson RéglageBrûleursdesurfacescellés NettoyageGrillesdesurfaceavectigedepositionnement SurfaceenvitrocéramiquePréparationdeconservesàlamaison Grilles de surfaceEntretien DE LA Table DE Cuisson UstensilesdecuissonNettoyagegénéral Acier InoxydableGrilles ET Chapeaux Émaillés Boutons DE Commande DE LA Table DE CuissonTableau DE Commande Dépannage Brûleurs DE SurfaceAssistance OU Service Si vous avez besoin de pièces de rechangePour plus d’assistance Nos consultants vous renseigneront sur les sujets suivantsKitchenaid NE Prendra PAS EN Charge Garantie DE LA Table DE Cuisson KitchenaidGarantie Limitée DE UN AN W10086190 All rights reserved

W10086190 specifications

The KitchenAid W10086190 is an essential component for those who value quality in their kitchen appliances. This high-performance dishwasher part is designed to enhance the functionality and reliability of your KitchenAid dishwasher, ensuring that it operates efficiently and effectively.

One of the standout features of the W10086190 is its compatibility with a range of KitchenAid dishwasher models. This universal fit makes it a prized component for many households, as it can replace worn or damaged parts, restoring optimal performance. The design is focused on durability and longevity, meaning that users can expect reliable use over an extended period.

The W10086190 boasts advanced technology that contributes to its superior cleaning power. It includes high-quality materials that are engineered to withstand the rigors of daily use. The innovation embedded in this part minimizes noise during operation, allowing for a quieter kitchen experience while maintaining effective cleaning capabilities.

Installation is straightforward, making it user-friendly. Homeowners can often replace the component without the need for professional assistance, saving time and money. This ease of installation adds to its appeal, as it fits seamlessly into the overall design of the KitchenAid dishwasher.

Another significant characteristic is the energy efficiency of the W10086190. It helps promote optimal water usage during cycles, aligning with environmentally friendly practices. Consumers are increasingly choosing appliances that not only perform well but also reduce their ecological footprints, and this part supports such initiatives.

Furthermore, the W10086190 plays a vital role in maintaining clean dishes, pots, and pans. Its design is aimed at preventing debris buildup and ensuring that water is evenly distributed throughout the dishwasher, enhancing overall wash performance. It also helps in maintaining the cleanliness of the dishwasher itself, preventing unpleasant odors and residues that can accumulate over time.

In summary, the KitchenAid W10086190 is an exemplary part that embodies quality and efficiency. With its durable design, compatibility with various models, energy-saving features, and user-friendly installation, it is a must-have for anyone looking to enhance their KitchenAid dishwasher's performance. Whether you are a cooking enthusiast or simply someone who values cleanliness, the W10086190 ensures that every meal's aftermath is handled with care and efficiency.
Top Page Image Contents