Installation Requirements, Toolsand Parts

INSTALLATION REQUIREMENTS

Toolsand Parts

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.

Tools Needed

■	Adjustable wrench	■	¹⁵⁄₁₆" combination wrench
■	Tape measure	■	Wrench or pliers
■	Marker or pencil	■	Pipe-joint compound
■	Pipe wrench		resistant to LP gas
■	Pipe wrench		Noncorrosive leak-
■ Flat-blade screwdriver		■	Noncorrosive leak-
■ Flat-blade screwdriver			detection solution
			detection solution

Parts Supplied

Check that all parts are included.

■Gas pressure regulator

■Burner grates

■Burner caps

■Simmer plate

■Grill grate (on some models)

■Drip tray (on some models)

■Front spill guard (on some models)

■Wave tray (on some models)

■Wave plate (on some models)

■Backguard

■Island trim

Parts Needed

Check local codes and consult gas supplier. Check existing gas supply and electrical supply. See “Electrical Requirements” and “Gas Supply Requirements” sections.

Location Requirements

IMPORTANT: Observe all governing codes and ordinances. Do not obstruct flow of combustion and ventilation air.

■It is the installer’s responsibility to comply with installation clearances specified on the model/serial rating plate. The model/serial rating plate is located on the underside of the cooktop burner box.

■It is recommended that an overhead vent hood be used with this cooktop. For island installations, a 48" (122 cm) hood is recommended.

■The cooktop should be installed in a location away from strong draft areas, such as windows, doors and strong heating vents or fans.

■All openings in the wall or floor where cooktop is to be installed must be sealed.

■Cabinet opening dimensions that are shown must be used. Given dimensions are minimum clearances.

■Grounded electrical supply is required. See “Electrical Requirements” section. Proper gas supply connection must be available. See “Gas Supply Requirements” section.

■The cooktop is designed to hang from the countertop by its side or rear flanges.

■The gas and electric supply should be located as shown in “Gas and Electric Connection Locations” section so that they are accessible without requiring removal of the cooktop.

■Provide cutout in left rear corner of cutout enclosure as shown to provide clearance for gas inlet, power supply cord, and to allow the rating label to be visible.

IMPORTANT: To avoid damage, check with your builder or cabinet supplier to make sure that the materials used will not discolor, delaminate or sustain other damage.

Mobile Home - Additional Installation Requirements

The installation of this cooktop must conform to the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280 (formerly the Federal Standard for Mobile Home Construction and Safety, Title 24, HUD Part 280). When such standard is not applicable, use the Standard for Manufactured Home Installations, ANSI A225.1/NFPA 501A or local codes.

In Canada, the installation of this cooktop must conform with the current standards CAN/CSA-A240-latest edition, or with local codes.

KGCP484KSS specifications

The KitchenAid KGCP484KSS is a premium gas cooktop that brings precision and performance to your kitchen. Designed for the discerning home chef, this model offers a range of features and technologies that ensure you can create culinary masterpieces with ease and efficiency.

One of the standout features of the KGCP484KSS is its four powerful burners, which provide versatility and control for various cooking techniques. The simmer burner is designed to maintain low temperatures, perfect for delicate sauces or melting chocolate without scorching. On the other hand, the high-output burner allows for quick boiling and searing, making it excellent for high-heat cooking. Additionally, the even heat distribution of each burner ensures consistent cooking results.

The cooktop features a sleek stainless steel surface that not only enhances its aesthetic appeal but also ensures durability and ease of cleaning. The spill-resistant burner design minimizes mess, allowing for quick cleanup after cooking. The heavy-duty cast iron grates are both robust and convenient, with a continuous design that allows for smooth movement of pots and pans across the surface.

For added convenience, the KGCP484KSS is equipped with an electronic ignition system that provides a reliable start every time, eliminating the need for matches or lighters. The cooktop also includes a professional-style knob control system that allows for precise temperature adjustments, giving you greater control over your cooking.

The KitchenAid KGCP484KSS is designed not only for performance but also for safety. The unit comes with a flame failure safety device, which automatically shuts off the gas if the flame goes out, ensuring peace of mind while cooking.

In terms of installation, this model features a well-thought-out design that fits seamlessly into various kitchen styles. It can be installed in both traditional and modern kitchens, making it a versatile option for any home chef.

Overall, the KitchenAid KGCP484KSS gas cooktop is an exceptional choice for those looking to elevate their cooking experience. With its powerful burners, durable construction, and thoughtful features, it embodies convenience, style, and professional-grade performance, allowing you to cook with confidence and creativity.