Disconnect brackets located at the top

back of dishwasher

n-lm

alternate position

rear Gross channel original position

Check to see if rear cross channel contacts drain,

electrical or water lines. If the channel contacts any line, pull dishwasher out of opening. Do Not remove the channel. Remove both cross channel screws on the right-hand side. Remove the bottom screw on the left- hand side and loosen the top screw. Align the bottom hole in the loose end of channel with the higher hole in frame and attach with screw. Tighten the top screw on the other end of channel. Repeat Step 9.

dishwasher valve 9

d h

	at drain hose is not
kinked,	crimped or contactins
electrical	coi-mections.	-

Place towel below dishwasher valve area.

Remove red plug from dishwasher valve. (A small amount of water may still be in the valve area from quality assurance testing.) Place hose clamp over dishwasher valve. Connect drain hose to valve and secure with hose clamp. Check for good fit and that there are no bends or kinks in drain hose that could restrict water flow.

top mounting

,brackets,

Do Not drop screws into tub.

deep through bracket holes into the underside of countertop using a l/8” drill bit. Do Not exceed 3/4” depth.

Attach brackets to underside of countertop. Make sure the screw heads do not interfere with door.

You MUST secure dishwasher to keep it from tilting when door is opened or closed. Do Not drop screws in dishwasher tub. If screws should fall into pump, pump and motor failure may occur. Remove paper from bottom of dishwasher.

If brackets cannot be attached to countertop, attach dishwasher to floor using l/4” lag bolts through hole in each side of dishwasher frame.

, equally spaced,

Align dishwasher door with cabinet front, not doors.

compression elbow (3/8” N PT one end). Connect street elbow to water valve. Connect supply line to compression elbow. If galvanized pipe is used, use a second 3/8” street elbow in place of the compression elbow.

Page 6

Open dishwasher and remove foam shipping pieces from upper corners of boor.

Remove bottom rack. Place a newspaper or large sheet of paper over bottom of dishwasher to protect the pump area when securing dishwasher to countertop.

corners of flange. Reattach brackets with bracket end facing away from dishwasher. Drill starter holes 3/4”

Open door approximately 3” and check for equal

spacing between inner door and tub sides. If necessary, loosen screws that fasten dishwasher to countertop and shift tub. Retighten screws.

Place level against interior flange as

shown. Level dishwasher front to back and side to side by adjusting leveling legs.

9741159 specifications

The KitchenAid 9741159 is a highly regarded attachment for stand mixers, designed to elevate your culinary skills and streamline your cooking process. Specifically engineered to cater to a range of kitchen tasks, this versatile accessory allows home cooks and professionals alike to expand their culinary repertoire effortlessly.

One of the standout features of the KitchenAid 9741159 is its robust construction. Made from high-quality materials, the attachment ensures longevity and durability, providing users with a reliable tool for numerous cooking applications. The sleek design not only makes it an aesthetically pleasing addition to your kitchen but also ensures easy attachment and detachment from the stand mixer.

The KitchenAid 9741159 is equipped with a powerful motor that delivers impressive performance. This efficient motor allows for seamless operation, whether you're mixing dough, whipping cream, or preparing batters. The attachment features various speed settings, providing precise control over your mixing techniques. This versatility makes it suitable for everything from light mixing tasks to heavy-duty baking.

Another notable characteristic of this attachment is its compatibility with a wide range of KitchenAid stand mixers. This feature ensures that whether you own an Artisan, Classic, or Professional model, you can utilize the 9741159 attachment for a variety of functions. The secure fit guarantees stability during operation, which is crucial when working with dense mixtures.

In addition to its functional benefits, the KitchenAid 9741159 also incorporates advanced technology that enhances user experience. The attachment's ergonomic design allows for comfortable handling, reducing strain during prolonged use. Furthermore, the easy-to-clean components make maintenance a breeze, allowing for quick rinsing or wiping down after each cooking session.

Overall, the KitchenAid 9741159 is more than just a basic mixer attachment; it is a powerhouse tool that empowers users to take their cooking and baking skills to new heights. With its durable construction, speed versatility, and compatibility with various KitchenAid models, this attachment stands out as an essential kitchen companion for both novice home cooks and seasoned chefs. Investing in the KitchenAid 9741159 means adding a reliable, efficient, and stylish tool to your culinary arsenal, paving the way for endless delicious creations.