-You can interrupt the brewing process at any time by pressing the on/off button I. If you switch the machine back on after you have interrupted the brewing process, the machine does not complete the interrupted brewing cycle.
Do not remove the water reservoir during a brewing cycle, as this causes the machine to draw in air.When this happens, the next cup will only be partly filled.
Note: If you only get a small quantity of coffee or no coffee at all out of the machine, you have not flushed the machine properly before first use. As a result, the boiler is not or not completely filled. Flush the machine properly (see chapter ‘Preparing the machine for use’) before you brew another cup of coffee.
10After use, lift the pod holder out of the machine and remove the coffee pod(s).
Be careful when you do this, for there may still be some water/coffee on the coffee pod(s).
Tips
,Rinse the pod holders and the coffee spout regularly to make sure that the coffee always tastes optimally.
,The SENSEO® coffee tastes best if you stir it before you drink it.
,If you intend to make another cup of SENSEO® coffee later, just leave the coffee machine switched on.The machine automatically switches itself off after 1 hour. (Fig. 18)
Cleaning
Never immerse the SENSEO\ coffee machine in water.
Never clean the machine by flushing it with the lid open.
1Always unplug the machine before you clean it.
2Clean the outside of the machine with a moist cloth.
3Remove the coffee spout (Fig. 19).
,You can disassemble the coffee spout for more thorough cleaning. (Fig. 20)
4Clean the coffee spout, the pod holders and the drip tray in hot water, if necessary with some
5Hold the cup tray in your hand while you clean it with hot water, if necessary with some
You can also clean the cup tray in the dishwasher.
To clean the cup tray, always remove it from the machine, as it might prove sharp when it is handled incorrectly.Always handle it carefully.
6Clean the pod holders in hot water, if necessary with some
Make sure the sieve in the centre of the pod holder is not clogged. If the sieve is clogged, unclog it by rinsing the pod holder under a running tap.
If necessary, use a
7Clean the water reservoir in hot water, if necessary with some
Note:You can remove the cover of the water reservoir to clean the inside thoroughly.
Note: If you use a
8Rinse the parts with fresh water after cleaning and put them back into the machine.
9Clean the water distribution disc with a moist cloth (Fig. 25).
Be careful when you do this. Make sure that the rubber sealing ring does not get stuck under the edge of the water distribution disc. If it does, the coffee machine starts to leak!
Flushing
If you have not used the coffee machine for three
days, flush it with fresh water before you use it
again.
Flush the machine in the following way:
1Fill the water reservoir with cold water up to the MAX indication and put it back onto the machine. (Fig. 3)
2Put the
3Put a bowl (with a capacity of at least 1500ml) under the coffee spout to collect the water. (Fig. 8)
4Press the on/off button I and subsequently press the
cup button °° briefly at the same
time. (Fig. 9)
The machine fills itself with water from the water
reservoir.This takes some time and you will probably not notice that this happens. After a while,
the machine starts to flush and switches itself off after the flushing cycle.
Descaling
Regular descaling prolongs the life of the coffee machine and guarantees optimal brewing results for a long time. If you use the machine twice a day on average, you must descale it once every 3 months.
1Fill the water reservoir up to the MAX indication with descaler and water according to the instructions on the package of the descaler.Then put the water reservoir back onto the coffee machine. (Fig. 3)
Use a descaler based on citric acid.
2Press on/off button I. (Fig. 10)
The machine is ready for use when the indicator light burns continuously.
3Place the
We advise you to put a used coffee pod in the pod holder when you descale the machine.This
pod serves as a ‘filter’ to prevent the sieve in
the pod holder from getting clogged with scale residues.
4Put a bowl with a capacity of at least 1500ml under the coffee spout to collect the mixture of descaler and water. (Fig. 8)
5Press the
Never descale the SENSEO\ coffee machine with the lid open. Make sure the lid is properly locked.
6Repeat steps 1 to 5 with a new mixture of descaler and water.
7Rinse the water reservoir with fresh water to remove descaler residues. Flush the machine with fresh water at least 3 times by repeating steps 1 to 5.
,Do not refill the water reservoir with used hot water.
8Clean the pod holder after descaling to prevent the sieve in the centre from getting clogged.
Frost-free storage
If the coffee machine has already been used and
therefore has been flushed with water, it may only
be used and stored in a
Replacement
You can order all removable parts from your Philips dealer or a Philips service centre.
Environment
,Do not throw away the machine with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this, you help to preserve the environment (Fig. 27).
Guarantee & service
If you need service or information or if you have a problem, please consult the worldwide guarantee leaflet or visit our website at www.philips.com. au or www.senseo.com.You can also contact the Philips Customer Care Centre in your country; they will be happy to help you.
For Australia Customer Service telephone: Freecall™: 1800 794 329
You find the telephone numbers for other countries in the worldwide guarantee leaflet.
If there is no Customer Care Centre in your country, turn to your local Philips dealer or contact the Service Department of Philips Domestic
Appliances and Personal Care BV.You find
their address and fax number in the worldwide
guarantee leaflet.
The purchase of the Philips SENSEO® coffee machine does not exhaust any of the rights of Sara Lee/Moccona or Philips under any of their patents nor does it confer upon the purchaser a licence under these patents.
Troubleshooting
If you have a problem, you may find the solution in
the table below. If the table does not provide the solution to your problem or if you have a question, see the chapter ‘Guarantee & service’.
422200197772 | 4/6 |