Curtis DVD5038 instruction manual Basic DVD Operation, Connecting Power Supply

BASIC DVD

OPERATION

AUTO 2X

2X

MEMO

FUNCTIONS

Screen Display

While a disc is playing, the status of various

functions may be checked, such as the tile, track

number, and several time categories.

1.Press the DISPLAY key once and the title appears along with the chapter and how much time has played.

DISPLAY	TT 01/02 CH 02/ 28
	00:21:05

CONNECTING

POWER SUPPLY

POWER

16

To activate either function, simply press the key or key on the remote control. The speed changes each time the key is pressed. To resume normal playback, press the PLAY key.

Memory Playback

This unit allows the viewer to stop playback,

then later continue playback from that exact disc

location. Press the STOP key to halt playback. The unit then will memorize the location where playback was stopped. To resume watching,

press the RESUME or PLAY key and the unit will

resume playback from the exact location where playback was stopped. (Exclude Mp3 DISC)

When you play DVD discs, press MENU or TITLE key return menu and title, the unit then will memorize the location, To resume watching

press the RESUME key and the unit will resume

playback from the exact location.

PLAY

RESUME

2.Press the DISPLAY key again and the remaining time for that particular title appears.

TITLE REMAIN

01 44 34

3.Press the DISPLAY key again and the total elapsed time for that particular chapter appears.

CHAPTER ELAPSED

4. Press the DISPLAY key again and the

total remaining time for that particular chapter

DVD5036 DVD & AMPLIFIER SYSTEM	DVD/CD/MP3/CD-RW/HDCD	OPEN/CLOSE	PLAY	STOP	PREV	NEXT		VOLUME
		PRE/TUN	AUTO	MEMO	DOWN	UP	INPUT
POWER
							DOWN	UP

Before plugging the power cord into the AC outlet, check to make sure all of the connections have been properly completed. When they have been, carefully plug power cord into outlet.

Press the POWER button on the front panel to power the unit. The display panel will light.

When the unit is initially powered, a brief surge of electricity may cause interference with other		13
electronic equipment on the same circuit. If this occurs, connect the unit to an outlet on a	different
circuit.

BASIC OPERATION

Slow Motion

This DVD receiver has the ability to play discs in slow motion in either forward or reverse direction. Each time the SLOW key is pressed, the speed will slow from forward slow speed1/ 2, to 1/ 4, to 1/ 8, to 1/ 16 to reverse slow speed 1/ 2, to 1/ 4, to 1/ 8, to 1/ 16, to normal speed. To resume normal playback, press the PLAY key.

appears.

CHAPTER REMAIN

5.Press the DISPLAY key again and the display turns off.

Selecting Sound Source

1. Press any function button (DVD, AM/FM,

AUX1, AUX2) to select the desired sound source.

The appropriate symbol will appear in the display.

2.When the AM/FM tuner button is pressed, the last station listened to will play.

Note: The desired program source will not play

unless it and the selected signal button coincide

with the active program source signal input.

Volume Control

The volume may be adjusted by either turning the large volume knob on the front panel or using the appropriate volume button on the remote control.

Mute

Pressing the MUTE button temporarily mutes every speaker. To resume audio, press MUTE button again.

SLOW