XDVD8181 OPERATION
DVD Operation - Parking Brake Initialization
CAUTION !!!
IT'S UNLAWFUL TO OPERATE A VEHICLE WHILE VIDEO IS DISPLAY IN THE DRIVERS VIEWING AREA
ENGAGE EMERGENCY BRAKE
TO ENJOY VIDEO
Front TFT Video Initialization
Parking Brake Initialization Situation 1
Parking Brake Initialization Situation 2
Note: The transition time must be less than 2 sec between depressed and release
SAFETY WARNING
•The video display of the
•Audio can be heard while the monitor is closed.
•The vehicle must be in park and the parking brake applied to view video on the
•As a safety feature, “ENGAGE PARKING BRAKE” blue screen will show on the display when the vehicle's parking brake is not engaged. Video display on the front monitor isn't allowed until the PARKING BRAKE is active. After connecting the yellow/blue PARKING BRAKE wire to brake switch circuit as described below, note however, DVD and AV1 audio can be heard while the vehicle is in motion without engaging the parking brake.
Follow this two initialization procedure carefully to allow video playback on XDVD8181 front panel TFT:
There are usually two situations that start the PARKING BRAKE Sequence.
First situation is while driving:
1)Stop vehicle, put in Park, make sure PARKING BRAKE is off / released
2)Depress PARKING BRAKE for 1 sec
3)Release PARKING BRAKE for 1 sec
4)Depress PARKING BRAKE permanently
NOTE: Once above procedure
Second situation is while already parked and the PARKING BRAKE is already depressed:
1)Keep vehicle in Park, PARKING BRAKE should be off
2)Release PARKING BRAKE for 1 sec
3)Depress PARKING BRAKE for 1 sec
4)Release PARKING BRAKE for 1 sec
5)Depress PARKING BRAKE permanently
NOTE: Once 2nd procedure is completed, approx 5
NOTE: This procedure will have to repeated if the IGN is turned off.
31