Assembling Your Hand Blender

1.Before using the KitchenAid™ Hand Blender for the first time, wipe the motor body with a clean, damp cloth to remove any dirt or dust. Mild dish soap may be used, but do not use abrasive cleansers.

NOTE: Do not immerse the motor body in water.

Dry with a soft cloth. Wash the attachment by hand or in the dishwasher. Dry thoroughly.

NOTE: Always be sure to unplug the power cord from the wall socket before attaching or removing attachment.

2.Remove the attachment by pressing both ejector buttons on either side of the body.

3. Read Operating Tips (page 5).

Operating Your Hand Blender

Using the Blending Attachment

1.Insert the blending attachment into the motor body.

2.Plug the electrical cord into an electrical wall socket.

3.Adjust the speed by turning the speed control dial on top of the Hand Blender.

4.Insert the Hand Blender into the mixture.

NOTE: Hand Blender should only be immersed in liquids the length of the attachment. Do not submerge beyond the seam of the blending attachment. Do not immerse the motor body into liquids or other mixtures.

5.Press the power button to activate the Hand Blender.

6.When blending is complete, release the power button before removing Hand Blender from the mixture.

7.Unplug immediately after use, before removing attachment.