operating the hand blender
Assembling the Hand Blender
Before First Use
Before using the Hand Blender for the first time, wipe the motor body, the blending arm with blade and the guards with a clean, damp cloth to remove any dirt or dust. Mild dish soap may be used. Do not use abrasive cleansers. Dry thoroughly with a soft cloth. See “Care and Cleaning” section for more information.
1 | Insert blending arm into motor body |
and twist until it clicks to lock in place. |
Port
Mounting 
grips 
3 | If using a pan guard, place it on a flat |
surface and position with mounting clips |
between the ports of the blade.
2 Remove the bell guard from the blade.
|
|
4 | Snap pan guard into place with an even, |
downward motion. | |
|
|
NOTE: Use the bell guard to avoid damage to blade when Hand Blender is not in use.
Bell guard
Use the pan guard to avoid damage to cookware while using Hand Blender.
Pan guard
5 | Slide the charged battery into the top |
of the Hand Blender motor body. Make |
sure it latches securely.
10