0912HP_EU
14ENGLISH
7 Night mode section
a) button to activate Night mode
–Night mode will reduce the dynamics of the audio signal.This will result in both the loudest and the most silent audio signals becoming clearly audible, even at lower volume levels.
–The audio signals on a DVD movie disc have large dynamics, i.e. the difference in loudness between the loudest and most silent signal can be very large. In order to hear both the loudest and most silent signal you normally would have to turn up to volume of the headphone.
In case however you would prefer to listen at lower volume levels, it could result in the most silent signals becoming difficult to hear: by
making use of the night mode this can be resolved.
b)‘Night Mode’ menu field yellow LED:
lights up whenever Night mode is possible
c)‘NIGHT’ indicator green LED:
lights up whenever Night mode is activated
8Dynamic Bass Boost section
a)button to toggle the DBB function
b)‘DBB’ menu field illuminated by yellow LED
c)‘DBB’ indicator green LED: lights up whenever DBB is active
9Headphone output section
a)2 x 6.3mm headphone jack sockets
b)rotary volume control
Base station rear panel (figure 2)
10 Power connector
a) AC connector for AC mains cable
11 Analogue Input/Output connectors
a)stereo input (L/R)
b)stereo output (L/R) providing AASR function
c)
–set to +6dB in case of weak audio input signals
–set to 0 dB in case of distorted audio input signals
12 Digital Input/Output connectors
a)coax input (S/P DIF)
b)coax output (S/P DIF) providing AASR function