Before you start | KitchenAid 4366501 specification

30” Cooktop

l Note: 24” min. clearance if bottom of wood or metal cabinet is protected by not

30” min. base cabinet is required. If cabinet has a drawer, a 3-l/2” depth clearance from the countertop to the top of the drawer (or other obstruction) in the base cabinet is required.

Before you start...

Proper installation is your responsibility. Make sure you have everything for correct installation.

less than i/4” flame retardant millboard covered with not less than No. 28 MSG sheet steel, 0.015” stainless steel, or

30” min. cabinet width above cooktop

It is the responsibility of the installer to comply with the installation clearance specified on the serial/rating plate. The serial/rating plate is found

0.024” aluminum or 0.020” I- copper.

30” min. clearance between top of cooking platform and bottom of unprotected wood or metal cabinet.

Do Not seal cooktop to countertop.

For minimum

clearances,depth see Note.*

l-112” m’in.

iunction box on

above the floor line.

on the bottom of the cook-top.

Check location where cooktop will be installed. The location should be away from strong draft areas, such as windows, doors and strong heating vents or fans. The cooktop should be located for convenient use in the kitchen.

Grounded electrical supply is required. See “Electrical requirements.”

Important:

Observe all governing codes and ordinances. Failure to meet governing codes and ordinances could lead to fire or electrical shock.

NOTE: The clearances specified are for combustible walls and materials that have a density or 20 or more pounds per cubic foot. No evaluation has been made for installations adjacent to materials that are less than 20 pounds per cubic foot or to plastic tiles and sheeting.

Countertop opening dimensions that are shown must be used. Given dimensions are minimum clearances and provide required 0” clearance.

New installations -follow minimum dimensions given.

For new installations:

+28-718”

opening width 4

l-718” min. space to front edge of countertop

Replacement installations - Be sure that front edge of cooktop is at least 1-l/2” back from front edge of countertop.

A built-under oven may be installed under this cooktop if oven is approved for this type of installation. Check for approval label located on top of oven. If label is not located, contact dealer to confirm that oven is approved. Refer to oven manufacturers installation instructions for approval and proper cutout dimensions.

When installing cooktop over a built-under moven, Do Not fasten cooktop to countertop with clamps. Cooktop then will be easy to remove if servicing is ever necessary.

36” Cooktop

*24” min. clearance if bottom of wood or metal cabinet is protected by not less than l/4” flame retardant millboard covered with not less than No. 28 MSG sheet steel, 0.015” stainless steel, or 0.024” aluminum or 0.020” copper.

30” min. clearance between top of cookin platform and bottom o3 unprotected wood or metal cabinet.

36” min. base cabinet is required. If cabinet has a drawer. a 3-l/2” deoth clearance from the countertop to’the top of the drawer (or other obstruction) in the base cabinet is required.

36” min. cabinet width above cooktop

For	f
	minimum
clearance:,		18” min. clearance
see	Note.
		upper cabinet to

ALL OPENINGS IN THE WALL OR FLOOR WHERE THE COOKTOP IS TO BE INSTALLED MUST BE SEALED.

Electrical Shock Hazard It is the customer’s responsibility: l To contact a qualified electrical

installer.

l To assure that the electrical installation is adequate and in conformance with National Electrical Code, ANSUNFPA 70

-latest edition**, and all local codes and ordinances.

Failure to do so could result in electrical shock or other personal injury.

Personal Injury Hazard Cabinet storage above the cooking surface should be avoided. If cabinets are already installed, reduce the hazard of reaching over a heated cooking surface by installing a range hood.

The range hood should extend a minimum of 5 inches out from the bottom of the cabinets.

Reaching over a heated cooking surface could result in a serious burn.

\	junction		box on		-
\	wall	12”	or	more	I	II
	above	the		floor	I	I

For new installations:

634-718” opening width &,

Tools needed for installation:

l-718” min. s ace to front edge o Pcountertop

4366501 specifications

The KitchenAid 4366501 is a versatile and powerful stand mixer that has become a staple in many kitchens. Renowned for its robust design and exceptional performance, this kitchen appliance is perfect for anyone from novice home cooks to professional bakers.

One of the standout features of the KitchenAid 4366501 is its powerful motor. With a high-performance 325-watt motor, it provides ample power to handle a variety of tasks, from mixing dough and whipping cream to making batter and kneading bread. The mixer is built to endure heavy use, ensuring it can tackle even the most demanding recipes with ease.

The 4366501 also boasts a 10-speed slide control, which allows for precise speed adjustments to accommodate different mixing techniques. From slow stirring for delicate ingredients to high-speed mixing for vigorous tasks, users can achieve the perfect consistency for their recipes. This flexibility makes it an invaluable tool for preparing a wide array of dishes.

Another notable characteristic of the KitchenAid 4366501 is its generous 4.5-quart stainless steel mixing bowl. This bowl not only offers plenty of capacity for large batches but also features a comfortable handle for easy pouring and transferring. Its durable construction ensures resistance to chipping and tarnishing, making it a long-lasting addition to your kitchen.

The mixer comes with several essential attachments, including a flat beater, dough hook, and wire whip. These attachments make it suitable for various functions, such as mixing, kneading, and whipping. Moreover, the multipurpose hub allows users to attach additional accessories, enhancing the mixer’s versatility. This unique feature transforms the KitchenAid stand mixer into a multi-functional kitchen appliance, capable of grinding meat, making pasta, or even juicing fruits.

Durability is a defining characteristic of the KitchenAid 4366501. With a metal construction and a classic tilt-head design, it blends aesthetics with functionality. Available in a range of colors, it can complement any kitchen décor.

In summary, the KitchenAid 4366501 stand mixer is an exceptional kitchen tool that combines power, versatility, and durability. With its robust motor, ample capacity, and a variety of attachments, it empowers home cooks to explore their culinary creativity while ensuring seamless and efficient preparation of a multitude of recipes. Whether baking bread, mixing dough, or preparing decadent desserts, the KitchenAid 4366501 stands out as an essential kitchen companion.