Now start, With cooktop in kitchen, Panel C

Now start...

With cooktop in kitchen.

Property Damage

Lift entire cooktop up from cutout when repositioning cook-top in countertop opening.

Failure to do so could scratch the countertop.

Insert the cook-top into the countertop. Center the cooktop in the cutout. Check that the front of

-the cook-top is parallel to the front edge of the countertop. Check that all required clearances are met. If cook-top is not properly positioned, lift the entire cooktop out of opening to make adjustments.

clamp

	slot
	#
screw and clam	f clamp tab
	f clamp tab

burner box

I 1

121Insert one clamp tab through each

. slot located on sides of the burner box.

Note: If installing cooktop over a built-under oven, Do Not fasten cook-top to countertop with clamps. Cooktop will then be easy to remove if servicing is ever required.

Do Not over-tighten screws Overtightening screws could cause personal injury or product damage.

Secure cooktop to countertop by hand-tightening each screw; then use a screwdriver to tighten each screw 1 to l-112 more turns. Do

Not overtighten screws.

Make electrical connection. (See “Electrical requirements” and “Electrical connection” sections, Panel B.)

75 ’ Turn on power supply.

Personal Injury Hazard

Do Not touch cooktop surface. Areas near elements may be hot.

Touching a heated cooking surface could result in a serious burn.

Push in and turn each control knob to the “HI”position. Check the operation of the cooktop elements and indicator lights.

To get the most efficient use from your new cooktop, read your KitchenAid Use and Care Guide. Keep Installation Instructions and Guide close to cooktop for easy reference.

Numbers correspond