Product Safety, Installation, Away from Heat

PRODUCT SAFETY

ATTENTION

Read your manual carefully since it contains instructions which will ensure safe installation, use and maintenance of your appliance.

Your Refrigerator is built to International safety standards (EN60) and has been awarded the European approval mark (IMQ) for compliance with UK electrical safety requirements. It also meets the EC standards on the prevention and elimi- nation of radio interference (EC directive 87/308 - 02.06.89).

1.This appliance must not be installed outdoors - not even in an area protected by a roof. It is extremely dangerous to leave it exposed to rain or storms.

2.It must only be used by adults and exclusively to re- frigerate and freeze foodstuffs, following the instructions for use contained in this manual.

3.Do not ever touch or handle the appliance with bare feet or with wet hands or feet.

4.It is highly recommended that you do not use extension cords or multiple socket adapters. If the refrigerator is in- stalled between cabinets, make sure that the cord is not bent or dangerously pinched or compressed.

5.Never pull on the cord or the refrigerator to remove the plug from the wall socket - this is very dangerous.

6.Never touch the cooling components within the appli- ance, especially with wet hands because this could result in injury.

7.Never put ice cubes just removed from the freezer into your mouth because they could stick to your mouth and

cause burns.

8.Never clean the appliance or perform maintenance without first disconnecting it from the electrical mains. Turning the thermostat knob to the "OFF" setting does not suffice to break all electrical contact with the mains.

9.Before having your old refrigerator picked up for dis- posal, remove or make inoperable any locking devices to prevent children who might play in or around the appliance from being locked inside.

10.Before calling for service/assistance in the case of malfunction, consult the chapter entitled “Troubleshooting" to determine whether it is possible to eliminate the prob- lem. Do not try to repair the problem by trying to access the internal components of the appliance.

11.If damaged, the power supply cord on this appliance must necessarily be replaced by our service centre because special tools are required for replacement.

12.Do not use electric appliances inside the compartment for food storage, if these are not those recommended by the manufacturer.

13.At the end of the functional life of your appliance – containing cyclopentane gas in the insulation foam and perhaps gas R600a (isobutane) in the refrigeration circuit

– the latter should made safe before being sent to the dump. For this operation, please contact your dealer or the Local Organisation in charge of waste disposal.

INSTALLATION

To ensure that the appliance operates properly and to reduce energy consumption, it is important that the appliance is installed correctly.

Ventilation

The compressor and condenser generate heat and, therefore, need to be ventilated properly. Avoid placing refrigerator in direct sunlight, or next to an electric stove or similar appliance. Areas not adequately ventilated are not suitable for this appliance.

During installation, make sure not to cover or obstruct the grates that allow for proper ventilation of the appliance.

Away from Heat

Avoid positioning the appliance in a place where it is directly exposed to sunlight or near an oven, hob or the like.

Electrical Connection and Earthing

Before proceeding with the electrical connection, make sure that the voltage indicated on the rating plate, located at the bottom left near the fruit and vegetable crisper,

corresponds

to the mains voltage in your home and that the socket is fitted with a standard earthing wire in accordance with safety standards for 46/90 systems. If the socket is not fitted with an earthing wire, the manufacturer will not be held liable for any damages and/or injuries arising out of the use of the appliance. Do not use multiple sockets or adapters.

Position the appliance in such a way that you can access the socket where it is plugged in. Insufficient power?

The electrical socket must be able to handle the maximum power load of the appliance, which is indicated on the rating plate located at the bottom left next to the vegeta- ble crisper.

Before making the electrical connection ...

After the appliance has been delivered, place it in the ver- tical upright position and wait at least 3 hours before in- serting the plug into the socket in order to ensure that it functions properly.

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR 5 YEAR PARTS GUARANTEE ON 08448 24 24 24

RSA specifications

Hotpoint RSA, a prominent player in the realm of household appliances, has become synonymous with reliability and innovation. This refrigerator model exemplifies the brand’s commitment to enhancing everyday life through technological advancements and user-oriented features.

One of the standout characteristics of the Hotpoint RSA is its spacious interior, designed to cater to modern storage needs. The fridge compartment is equipped with adjustable shelves, allowing users to optimize space for larger items, while dedicated storage zones keep fruits, vegetables, and dairy products fresh and organized. The efficient use of space often includes door bins that are perfect for condiments and beverages, ensuring everything is within easy reach.

The Hotpoint RSA also boasts advanced cooling technologies that maintain an ideal temperature throughout the unit. Its air circulation system ensures that cold air is evenly distributed, reducing the risk of temperature fluctuations that can spoil food. This feature is complemented by a multi-airflow system that enhances cooling efficiency while minimizing energy usage, aligning with today’s eco-conscious consumer preferences.

Energy efficiency is a significant focus of Hotpoint, and the RSA model reflects this commitment by often carrying Energy Star certification. This indicates reduced energy consumption, which is not only cost-effective for users but also environmentally friendly. Furthermore, the refrigerator is designed to operate quietly, making it suitable for open-plan living spaces where noise could be a concern.

Another key feature of the Hotpoint RSA is its user-friendly interface. Whether it’s the intuitive temperature controls or the straightforward layout of its features, the design prioritizes convenience. Some models may come with a built-in water dispenser, allowing for easy access to chilled water, which is perfect for hydration without the need for bottled alternatives.

In terms of durability, the Hotpoint RSA is built with high-quality materials that withstand the rigors of daily use. The sleek exterior not only adds a modern touch to any kitchen but is also designed to resist smudges and fingerprints, ensuring that the appliance remains looking pristine with minimal effort.

Finally, Hotpoint’s commitment to customer satisfaction is reflected in their warranty and support services, offering peace of mind for users investing in this appliance. The combination of ample storage, advanced cooling technologies, energy efficiency, and durable design makes the Hotpoint RSA an excellent choice for any household seeking a reliable refrigerator that stands the test of time.