Other functions
Fridge compartment chiller tray cold air control (model no. RSB20)
The slide at the rear of the chiller tray controls the amount of cold air that flows into the fridge compartment. The chiller tray must be pulled out of the fridge in order to adjust the slide.
Fridge compartment too warm:
Open the slide at the rear of the chiller tray (indicator pointer visible). If the fridge compartment is still to warm, turn the thermostat control to a colder setting (higher number).
Fridge compartment too cold:
Close the slide at the rear of the chiller tray (indicator pointer covered). If the fridge compartment is still to cold, turn the thermostat control to a warmer setting (lower number).
ACLOSED
BOPEN
Warmer fridge setting:
Indicator pointer covered A = closed.
Colder fridge setting:
Indicator pointer visible B = open.
Care & Cleaning
*Disconnect the appliance from the power supply.
*Do not pour water over the appliance.
*The internal compartments should be cleaned periodically using a solution of bicarbonate of soda and warm water.
*Clean the accessories separately with soapy water. Do not put in a dishwasher.
*Do not use abrasive products, detergents or soaps. After washing, rinse with clean water and dry carefully. When the cleaning operations have finished, reconnect the plug with dry hands.
*You should clean the condenser at least twice a year in order to save energy and increase productivity.
Replacing the light bulb
When replacing a bulb;
1.unplug the appliance from the power supply.
2.Press the hooks on the sides of the light cover top and remove the light cover.
3.Replace the bulb with a new one of not more than 15W.
4.Replace the light cover and after waiting 5 minutes restart the appliance.
10