Hotpoint RLA 21 manual Product Safety, Installation

Page 3

PRODUCT SAFETY

ATTENTION

Read your manual carefully since it contains instructions which will ensure safe installation, use and maintenance of your appliance.

Your Refrigerator is built to International safety standards (EN60) and has been awarded the European approval mark (IMQ) for compliance with UK electrical safety requirements. It also meets the EC standards on the prevention and elimi- nation of radio interference (EC directive 87/308 - 02.06.89).

1.This appliance must not be installed outdoors - not even in an area protected by a roof. It is extremely dangerous to leave it exposed to rain or storms.

2.It must only be used by adults and exclusively to refriger- ate and freeze foodstuffs, following the instructions for use contained in this manual.

3.Do not ever touch or handle the appliance with bare feet or with wet hands or feet.

4.It is highly recommended that you do not use extension cords or multiple socket adapters. If the refrigerator is in- stalled between cabinets, make sure that the cord is not bent or dangerously pinched or compressed.

5.Never pull on the cord or the refrigerator to remove the plug from the wall socket - this is very dangerous.

6.Never touch the cooling components within the appliance, especially with wet hands because this could result in injury.

7.Never clean the appliance or perform maintenance without first disconnecting it from the electrical mains. Turning the thermostat knob to the "OFF" setting does not suffice to

break all electrical contact with the mains.

8.Before having your old refrigerator picked up for disposal, remove or make inoperable any locking devices to prevent children who might play in or around the appliance from being locked inside.

9.Before calling for service/assistance in the case of mal- function, consult the chapter entitled “Troubleshooting" to determine whether it is possible to eliminate the problem. Do not try to repair the problem by trying to access the inter- nal components of the appliance.

10.If damaged, the power supply cord on this appliance must necessarily be replaced by our service centre because special tools are required for replacement.

11.Do not use electric appliances inside the compartment for food storage, if these are not those recommended by the manufacturer.

12.At the end of the functional life of your appliance – containing cyclopentane gas in the insulation foam and perhaps gas R600a (isobutane) in the refrigeration circuit – the latter should made safe before being sent to the dump. For this operation, please contact your dealer or the Local Organisation in charge of waste disposal.

INSTALLATION

To ensure that the appliance operates properly and to reduce energy consumption, it is important that the appliance is installed correctly.

Ventilation

The compressor and condenser generate heat and, therefore, need to be ventilated properly. Avoid placing refrigerator in direct sunlight, or next to an electric stove or similar appliance. Areas not adequately ventilated are not suitable for this appliance.

During installation, make sure not to cover or obstruct the grates that allow for proper ventilation of the appliance.

Away from Heat

Avoid positioning the appliance in a place where it is directly exposed to sunlight or near an oven, hob or the like.

Electrical Connection and Earthing

Before proceeding with the electrical connection, make sure that the voltage indicated on the rating plate, located at the

bottom left near the fruit and vegetable crisper, corresponds to the mains voltage in your home and that the socket is fitted with a standard earthing wire in accordance with safety standards for 46/90 systems. If the socket is not fitted with an earthing wire, the manufacturer will not be held liable for any damages and/or injuries arising out of the use of the appliance. Do not use multiple sockets or adapters.

Position the appliance in such a way that you can access the socket where it is plugged in.

Insufficient power?

The electrical socket must be able to handle the maximum power load of the appliance, which is indicated on the rating plate located at the bottom left next to the vegetable crisper.

Before making the electrical connection ...

After the appliance has been delivered, place it in the verti- cal upright position and wait at least 3 hours before inserting the plug into the socket in order to ensure that it functions properly.

3

Image 3
Contents Refrigerator Model RLA Instructions for Installation and UseContents Installation Product SafetyElectrical Connection Getting Your Appliance Ready for USE Temperature controlThermostat setting GET to Know Your ApplianceIx j HOW to USE the Refrigerator CompartmentCaring for Your Appliance Energy Saving TipsTroubleshooting Door Reversal Remove the doorReplacing the door Extended Warranties After Sales ServiceRepair Service and Information Help Desk Genuine Parts and AccessoriesUK 08709 077Recycling & Disposal Information GuaranteeSatisfaction guaranteed or your money back Guarantee terms and conditionsRepair Service and Information Desk Genuine Parts and AccessoriesKey Contacts

RLA 21 specifications

The Hotpoint RLA 21 is a compact refrigerator that brings efficiency and functionality into any modern kitchen. Ideal for those with limited space, this appliance is designed to offer ample storage while maintaining a stylish and sleek appearance. One of the standout features of the RLA 21 is its energy efficiency. Rated with an A+ energy class, it ensures lower electricity consumption, translating to cost savings over time while being more environmentally friendly.

In terms of capacity, the Hotpoint RLA 21 offers a generous 140 liters of storage space, making it a practical choice for individuals, couples, or small families. Its design includes adjustable shelves that allow users to customize the internal layout according to their needs. The door features several compartments, perfect for keeping beverages, condiments, and smaller items easily accessible.

The refrigerator also includes a dedicated freezing compartment, which is a notable feature for a unit of its size. This freezing space provides the convenience of storing frozen food, ice trays, and leftovers, enhancing its practicality. Moreover, the appliance comes equipped with a reversible door, offering flexibility in installation based on the kitchen layout.

Hotpoint has integrated several innovative technologies into the RLA 21 to enhance its performance. One such feature is the Active Oxygen technology, which helps to maintain the freshness of food by reducing bacteria levels inside the fridge. This technology works by releasing a small amount of active oxygen that helps to preserve fruits and vegetables, ensuring they last longer while retaining their natural flavors.

Another characteristic worth noting is the appliance's low noise level, rated at just 40 dB. This quiet operation makes it suitable for open-plan living spaces or smaller homes where noise can be a concern. The Hotpoint RLA 21 also boasts an easy-to-use mechanical control system, allowing users to select the desired temperature without complicated settings.

Overall, the Hotpoint RLA 21 is a versatile and efficient refrigerator that combines smart design, innovative technology, and practicality. Its blend of features makes it a reliable choice for anyone looking to maximize space without sacrificing functionality. Whether in a studio apartment, office, or as a secondary fridge, the Hotpoint RLA 21 stands out as a commendable addition to any environment.