Troubleshooting, Replacing the bulbs | Hotpoint HHC6.7AB, HHC9.7AB

Replacing the bulbs

Assembly: Secure the activated-carbon ﬁlter ﬁrst in the back using the hood's metal tabs and then in the front by pressing the two levers.

further information on the handling, recovery and recycling

of this product, contact the local authority, domestic waste GB disposal service or the reseller from whom you purchased it

Troubleshooting

If something does not work, make the following simple checks before contacting Technical Service:

If the hood does not operate:

Check that:

•the unit is powered up.

•a speed has been set.

Disconnect the unit from the mains and remove the grease ﬁlter.

Caution! Make sure the bulbs are cool before touching them.

1. Extract the guard by prising it out with a small ﬂat head screwdriver or something similar.

2. Replace the faulty bulb. Use only bulbs of the same type (for details, see the technical data in the following manual).

3. Reﬁt the guard (push it in).

Replacing the lights LED *

The hood is ﬁtted with a lighting system based on LED technology. The LEDs ensure optimal lighting, longer life and lower consumption compared with traditional lights. To replace them please contact the assistance service.

Electrical cable

If the power cable is damaged, it can be replaced by the manufacturer or his technical service, to prevent any attendant risks.

SCRAPPING

The unit is marked for conformity with European Directive 2012/19/EC, Waste Electrical and Electronic Equipment (WEEE). By ensuring that the unit is scrapped properly, the user contributes to safeguarding the environment and public health.

The symbol on the product or on its accompanying documents indicates that the product may not be treated as domestic waste but must be handed over to a sorting centre for electrical and electronic waste. Dispose of it in accordance with local waste disposal regulations. For

If the hood is not working effectively:

Check that:

•the selected motor speed is sufﬁcient to handle the amount of smoke and steam being produced.

•the kitchen is adequately ventilated for the unit to take air in.

•the charcoal ﬁlter is not exhausted (ﬁlter version).

If the hood turns off during normal operation:

Check that:

•the unit is powered up.

•the circuit breaker has not tripped.

In case of faulty operation, before contacting Technical service, ﬁrst disconnect the machine from the mains for at least 5 seconds by pulling its plug, then reconnect it. If the fault persist, contact Technical Service.

Save energy and respect the environment

•Please use the hood by setting the speed in line with the real extraction need; please limit the use of the “intensive speed” feature, if present. Using the hood in a rational way allows you to limit energy consumption and to avoid an useless waste of clean and air-conditioned air.

•Please don’t turn on the hood light unless this is needed to light the cooking area.

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

HHC9.7AB, HHC6.7ABK, HHC7.7AB, HHC6.7AB, HHC6.7ABI specifications

Hotpoint, a reputable brand in the world of home appliances, has made a significant impact with its range of built-in cooking hobs, specifically the models HHC6.7ABI, HHC6.7AB, HHC7.7AB, HHC6.7ABK, and HHC9.7AB. These hobs are designed to enhance cooking experiences by integrating advanced technology with user-friendly features.

The HHC6.7ABI model boasts a sleek and elegant design, featuring a stainless steel finish that complements any modern kitchen décor. It includes five cooking zones, each equipped with high-efficiency burners that provide rapid heat for quicker cooking times. The hobs are equipped with an automatic ignition system, allowing users to light the burners effortlessly with a simple turn of the control knob. Safety is prioritized with flame failure devices that automatically shut off the gas if the flame goes out.

Similarly, the HHC6.7AB model offers comparable features but also includes additional touch control settings that allow for a customizable cooking experience. This model stands out with its smooth ceramic surface, making it not only stylish but also easy to clean after use. Furthermore, a built-in timer helps users manage cooking times more effectively.

The HHC7.7AB model further enhances convenience with its innovative features, integrating a powerful induction cooking zone that provides quick and efficient cooking. Induction technology is known for its energy efficiency as it heats the cookware directly, reducing heat loss and saving energy in the process. This model is particularly favored by those looking for fast cooking solutions without compromising precision.

The HHC6.7ABK and HHC9.7AB models have drawn attention for their robust construction and versatility. The HHC6.7ABK is distinguished by its black glass surface, delivering a contemporary style while ensuring easy maintenance. The HHC9.7AB elevates user convenience with advanced features like programmable settings and multiple cooking zones that cater to various culinary techniques from simmering to searing.

Overall, the Hotpoint hobs combine style, efficiency, and safety, making them an excellent choice for both novice cooks and culinary enthusiasts alike. Each model in this lineup encapsulates modern cooking needs, ensuring that delicious meals can be prepared with ease and pleasure. These hobs are not just appliances; they are essential kitchen companions that reflect the ethos of quality and innovation inherent in the Hotpoint brand.