Installation, Positioning and connection

Installation

! Before placing your new appliance into operation

EN	please read these operating instructions carefully.
	please read these operating instructions carefully.
	They contain important information for safe use, for
	installation and for care of the appliance.
	! Please keep these operating instructions for future
	reference. Pass them on to possible new owners of
	the appliance.

Positioning and connection

Positioning

1. Place the appliance in a well-ventilated humidity- free room.

2. Do not obstruct the rear fan grills. The compressor and condenser give off heat and require good ventilation to operate correctly and save energy.

3. Ensure the appliance is away from any sources of heat (direct sunlight, electric stove, etc.).

Levelling

1.Install the appliance on a level and rigid floor.

2.If the floor is not perfectly horizontal, adjust the refrigerator by tightening or loosening the front feet.

Electrical connections

After the appliance has been transported, carefully place it vertically and wait at least 3 hours before connecting it to the electricity mains. Before inserting the plug into the electrical socket ensure the following:

•The appliance is earthed and the plug is compliant with the law.

•The socket can withstand the maximum power of the appliance, which is indicated on the data plate located on the right side of the horizontal surface in the top compartment, under the thermostat (e.g. 150 W).

•The voltage is within the range of values indicated on the data plate located on the right side of the horizontal surface in the top compartment, under the thermostat (e.g. 220-240V).

•The socket is compatible with the plug of the appliance.

If the socket is incompatible with the plug, ask an authorised technician to replace it (see Assistance). Do not use extension cords or multiple sockets.

!Once the appliance has been installed, the power supply cable and the electrical socket must be easily accessible.

!The cable must not be bent or compressed.

!The cable must be checked regularly and replaced by authorised technicians only (see Assistance).

!The manufacturer declines any liability should these safety measures not be observed.

Your appliance is supplied with a 13amp fused plug that can be plugged into a 13amp socket for immediate use. Before using the appliance please read the instructions below.

WARNING:

THIS APPLIANCE MUST BE EARTHED.

Replacing fuse covers:

When replacing a faulty fuse, a 13amp ASTA approved fuse to BS 1362 should always be used and the fuse cover re-fitted.

If the fuse cover is lost, the plug must not be used until a replacement is obtained.

Replacement fuse covers:

If a replacement fuse cover is fitted, it must be of the correct colour as indicated by the coloured marking or the colour that is embossed in words on the base of the plug.

Changing the plug:

Removing the plug

If your appliance has a non-rewireable moulded plug and you should wish to remove it to add a longer cable or to re-route the mains cable through partitions, units etc. please ensure that either:

- The plug is replaced by a fused 13amp re- wireable plug bearing the BSI mark of approval.

-The mains cable is wired directly into a 13amp cable outlet, controlled by a switch (in compliance with BS 5733) which is accessible without moving the appliance.

Disposing of the plug

Cut off and dispose of the supplied plug if it does not fit your socket. The cable should be cut as close as possible to the moulded plug.

Remove the fuse.

WARNING:

To avoid a shock hazard do not insert the discarded plug into a socket anywhere else.

NCD 191 I specifications

The Hotpoint NCD 191 I is a contemporary and stylish refrigerator that embodies the perfect blend of efficiency, design, and technology. Built to meet the demands of modern kitchens, it offers an impressive array of features that cater to everyday refrigeration needs.

One of the standout characteristics of the Hotpoint NCD 191 I is its spacious capacity. With ample storage space, it accommodates large grocery loads, making meal prep easier and more organized. The refrigerator compartment is meticulously designed with adjustable shelves, allowing users to customize their storage according to their requirements. The inclusion of a dedicated crisper drawer helps maintain the freshness of fruits and vegetables by regulating humidity levels.

In terms of energy efficiency, the Hotpoint NCD 191 I stands out with its A+ energy rating. This means it consumes less electricity compared to standard models, leading to reduced utility bills while being environmentally friendly. The appliance is equipped with an advanced cooling system that ensures an even temperature distribution, which effectively preserves food quality.

The Hotpoint NCD 191 I also boasts innovative technologies such as the No Frost system. This feature eliminates the need for manual defrosting by preventing ice buildup, thus maintaining optimal conditions for food storage. This not only saves time but also enhances the overall performance of the refrigerator.

Another notable feature is the multifunctional display. The digital interface provides users with easy access to temperature settings and other essential functions. This allows for precise control over the internal environment, ensuring that all food items are kept in ideal conditions.

The design of the Hotpoint NCD 191 I is equally impressive, as it seamlessly blends contemporary aesthetics with practicality. Available in various finishes, it can complement any kitchen décor. Additionally, its quiet operation makes it a suitable choice for open-plan living spaces.

In conclusion, the Hotpoint NCD 191 I stands out as a reliable and efficient refrigerator that addresses the needs of modern consumers. With its spacious design, energy-saving features, innovative cooling technologies, and sleek appearance, it is an excellent addition to any household looking for functionality combined with style. Whether you're a busy family or an individual who values convenience, the Hotpoint NCD 191 I is designed to enhance your kitchen experience.