Installation, Positioning and connection | Hotpoint HZ2022 specification

Installation

! Before placing your new appliance into operation

GB	please read these operating instructions carefully. They
	please read these operating instructions carefully. They
	contain important information for safe use, for installation
	and for care of the appliance.
	! Please keep these operating instructions for future
	reference. Pass them on to possible new owners of the
	appliance.

Positioning and connection

Positioning

1. Place the appliance in a well-ventilated humidity-free room.

2. Do not obstruct the rear fan grills. The compressor and condenser give off heat and require good ventilation to operate correctly and save energy.

3. Ensure the appliance is away from any sources of heat (direct sunlight, electric stove, etc.).

Electrical connections

After the appliance has been transported, carefully place it vertically and wait at least 3 hours before connecting it to the electricity mains. Before inserting the plug into the electrical socket ensure the following:

•The appliance is earthed and the plug is compliant with the law.

•The socket can withstand the maximum power of the appliance, which is indicated on the data plate located inside the freezer (e.g. 150 W).

•The voltage is in the range of values indicated on the data plate located inside the freezer (e.g. 220-240V).

•The socket is compatible with the plug of the appliance. If the socket is incompatible with the plug, ask an authorised technician to replace it (see Assistance). Do not use extension cords or multiple sockets.

!Once the appliance has been installed, the power supply cable and the electrical socket must be easily accessible.

!The cable must not be bent or compressed.

!The cable must be checked regularly and replaced by authorised technicians only (see Assistance).

!The manufacturer declines any liability should these safety measures not be observed.

Your appliance is supplied with a 13amp fused plug that can be plugged into a 13amp socket for immediate use. Before using the appliance please read the instructions below.

WARNING:

THIS APPLIANCE MUST BE EARTHED.

Replacing fuse covers:

When replacing a faulty fuse, a 13amp ASTA approved fuse to BS 1362 should always be used and the fuse cover re-fitted.

If the fuse cover is lost, the plug must not be used until a replacement is obtained.

Replacement fuse covers:

If a replacement fuse cover is fitted, it must be of the correct colour as indicated by the coloured marking or the colour that is embossed in words on the base of the plug.

Changing the plug:

Removing the plug

If your appliance has a non-rewireable moulded plug and you should wish to remove it to add a longer cable or to re-route the mains cable through partitions, units etc. please ensure that either:

- The plug is replaced by a fused 13amp re- wireable plug bearing the BSI mark of approval.

-The mains cable is wired directly into a 13amp cable outlet, controlled by a switch (in compliance with BS 5733) which is accessible without moving the appliance.

Disposing of the plug

Cut off and dispose of the supplied plug if it does not fit your socket. The cable should be cut as close as possible to the moulded plug.

Remove the fuse.

WARNING:

To avoid a shock hazard do not insert the discarded plug into a socket anywhere else.

Fitting a new plug

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR 5 YEAR PARTS GUARANTEE ON 08448 24 24 24

HZ2022 specifications

The Hotpoint HZ2022 is a standout appliance designed to enhance the cooking experience in modern kitchens. This versatile oven combines efficiency with advanced technology, catering to both novice and seasoned cooks.

One of the main features of the Hotpoint HZ2022 is its multifunctional oven design. With multiple cooking modes including fan assist, conventional baking, and grilling, the HZ2022 offers the flexibility needed for a wide range of recipes. The fan assist feature ensures even heat distribution, allowing dishes to cook thoroughly and uniformly, making it ideal for baking pastries and roasting meats.

Energy efficiency is a significant characteristic of the HZ2022. Rated with a high energy efficiency class, this oven helps reduce electricity consumption, making it not only an environmentally friendly option but also a cost-effective one. Its advanced insulation technology minimizes heat loss, retaining heat inside the oven while keeping the exterior cool to the touch.

The appliance also incorporates state-of-the-art digital controls, featuring an intuitive LED display that allows users to easily select cooking modes, set timers, and monitor cooking progress. The programmable timer ensures that meals are cooked perfectly, allowing users to enjoy their time without the worries of overcooking.

Safety is paramount in the design of the HZ2022, as it is equipped with a child lock feature, preventing accidental adjustments and ensuring peace of mind in homes with young children. The oven's door also features double glazing, which not only enhances safety but also improves energy efficiency by insulation.

The Hotpoint HZ2022 comes with a pull-out grill that grants easy access to monitor grilling foods without risking burns from heat. Additionally, its spacious interior provides ample cooking space, accommodating larger dishes or multiple trays simultaneously, making it perfect for family gatherings and entertaining guests.

Easy maintenance is another key benefit of the HZ2022, as it features a self-cleaning option that simplifies the cleanup process. The catalytic liners break down grease and food residues, allowing for a quick wipe down after use.

Overall, the Hotpoint HZ2022 is not only a stylish addition to any kitchen but also a powerful and efficient cooking appliance that meets diverse culinary needs, promoting convenience, safety, and energy savings.