Curtis RCD-718 instruction manual Listening to the Radio, Handling Compact Discs

Page 8

LISTENING TO THE RADIO

OPERATION

Press the STANDBY/ON button to turn the unit on.

Select the Tuner function by pressing the Tuner button on the panel of the main unit.

Select the desired frequency band that your station is on (FM, AM) with the STOP button on bo- th main unit and remote control.

Tune to the desired radio station by pressing the TUNING FWD/REW buttons on the remote control.

If you hold the TUNING FWD/REW button for more than half a second ,the unit will begin to au- tomatically scan until a strong signal is found or until the TUNING FWD/REW button is

Pressed again.

To turn off the radio, press the STANDBY/ON button to switch the unit into standby mode.

STORING PRESET STATIONS

Tune either automatically or manually (as described in previous sections) to the station to be st- ored.

Press the PROGRAM/MEMORY button on remote control once; "MEMORY" will blink on the display. The display will change for 5 seconds; during this time you must select the desired me- mory location by pressing the M-UP/REPEAT button.

Press the PROGRAM/MEMORY Button to store the station at that location. The unit can store up to 10 FM stations, 10 AM Stations.

TUNING TO A PRESET STATION

Select the desired program number by pressing the MEMORY UP/REPEAT button.

ANTENNA

For FM reception there is a built-in one-meter FM Antenna wire at the rear of the unit.

Unravel the wire and move it around to obtain the best reception. For AM reception, the signals are picked up through the AM loop antenna. You may have to move the loop antenna to obtain the best reception.

HANDLING COMPACT DISCS

To remove a disc from its storage case, press down on the center of the case and lift the disc out, holding it carefully by the edges.

Fingerprints and dust should be carefully wiped off the disc's recorded surface with a soft cloth. Unlike conventional records, compact discs have no grooves to collect dust and microscopic d- ebris so gently wiping with a soft cloth should remove most particles. Wipe in a straight line fro- m the inside to the outside of the disc. Small dust particles and light stains will have absoultely no effect on reproduction quality.

Page 7 Page 9
Image 8
Page 7 Page 9
Contents RCD-718 Table of Contents Important Safety Instructions Location of Controls Remote Control Installation BatteryBattery Replacement Using the Remote Controller CorrectlyPreparation for USE ConnectionsSpeaker Setting the ClockAC Power Operation Listening to the Radio Handling Compact DiscsDisc Play Loading and Unloading Compact DiscsDisc Errors To Stop a CD Part WAY ThroughTo Skip to the Next Track To Skip Back to the Previous Track on a DiscTrack Search For Repeat Disc Play of a Single TrackFor Repeat Play of ALL the Tracks Random PlayTimer on Function Preset EqualizerListening to Programmed Tracks To Clear the Program MemoryMaintenance and Care AC Connection

RCD-718 specifications

The Curtis RCD-718 is an advanced digital controller specifically designed for electric vehicle applications. Built to enhance the performance and efficiency of electric drive systems, the RCD-718 offers an array of features that tightly integrate with modern electric drive technologies.

One of the most significant characteristics of the Curtis RCD-718 is its robust control capabilities. The controller utilizes high-speed microprocessor technology to process data in real-time, enabling precise control over the electric drive system. This capability allows for smoother acceleration, improved torque management, and optimized energy consumption, essential attributes for enhancing the overall driving experience.

The RCD-718 features a user-friendly interface, showcasing a full-color display that provides essential feedback regarding system performance and diagnostics. This helps users easily monitor critical parameters such as battery voltage, current draw, and temperature, which are vital for maintaining system health and longevity. The intuitive graphical interface also allows for easy customization and adjustment of vehicle performance settings, tailoring the driving characteristics to suit different applications and driver preferences.

Moreover, the integration of advanced communication protocols is another standout feature of the Curtis RCD-718. It supports CAN bus communications, allowing it to interface with various vehicle systems seamlessly. This capability is crucial for enabling advanced functionality, such as regenerative braking and energy management systems, which improve overall efficiency and reduce wear on mechanical components.

Durability and reliability are hallmarks of the RCD-718 design. Constructed to endure harsh environmental conditions, it features robust circuitry and protective enclosures. Its built-in thermal protection mechanisms and self-diagnostic capabilities ensure that the controller can effectively handle the demands of rugged terrains and frequent operational changes.

Additionally, the Curtis RCD-718 is designed for scalability, making it suitable for a wide range of electric vehicle applications, from small electric cars to larger industrial vehicles. The modular architecture allows for easy integration with different motors and battery types, offering flexibility in various design configurations.

In summary, the Curtis RCD-718 digital controller is a versatile, efficient, and reliable solution for electric vehicle applications. With cutting-edge technology, comprehensive control features, and a strong focus on user experience, it stands out as a preferred choice for manufacturers seeking to enhance the performance of their electric drive systems.
Top Page Image Contents