Hotpoint LI2I3A manual Troubleshooting

Page 11

Troubleshooting.

First, don’t panic!

There may be nothing wrong at all. Look for your problem below, then check the things we suggest. More often than not, this will give you the answer to your problem, and you’ll be able to carry on without having to telephone your Service Office.

It is not working!

Are you using a plug and socket?

-Check that the plug is firmly pushed in.

-Check the power supply, by plugging in another appliance.

-Has the fuse blown?

It is not working!

Is the mains lead wired directly into a double pole isolating switch?

-Check that the wires in the mains lead are correctly connected. (See page 2)

The Cooker Hood is not working

satisfactorily...

-Check you have selected the correct fan speed. (See page 8)

-Check you have left the cover over the recirculation grille on top of the Hood (extraction only), (See page 6).

-Check if the grease filter needs replacing (See page 9).

The light is not working...

-Check the bulb is screwed in securely.

-Replace the light bulb (See page10)

The Cooker Hood switches off

intermittently...

-Check the mounting height above the hob is correct (See page 5).

The heat from the hob may cause the fan motor to overheat/cut-out.

If, after following these instructions, you are still having problems, contact your nearest Service Centre (See back cover).

Parts

Please remember your new appliance is a complex piece of equipment.

Repairs may only be performed by qualified technicians. ‘DIY’ repairs or unqualified and untrained service people may put you in danger, could damage the appliance and might mean that you lose cover under the Guarantee.

If you do experience a problem with the appliance, don’t take any risks, call in a Service Engineer (See back cover).

Our Parts are designed exclusively to fit only GDA Ltd appliances. Do not use them for any other purpose as you may create a safety hazard.

11

Image 11
Contents Instructions for Installation and Use Electrical Requirements Your new Cooker HoodContents Unpacking DimensionsGet to know your Cooker Hood Extraction Recirculation Installing your Cooker HoodInstallation Installation for RecirculationDucting Top ExtractionRear Extraction Fixing to the wall Wall Vent KitMounting Height Fixing to the cabinetDon’t Operating your Cooker HoodCaring for your Cooker Hood Filters and their replacementHow to replace the light CleaningTroubleshooting Key Contacts