Hotpoint HD90X manual Electrical Connection, If the Fitted Plug is Removed

Page 7

Electrical Connection

WARNING: This appliance MUST be earthed. Connect to a 230 - 240V A.C. Supply only.

Connection to the electricity supply should be made via a properly earthed, readily accessible wall socket which is adjacent to and not more than 1.25m away from the appliance and capable of electrical isolation.

Should this plug not fit the socket outlet in your home it should be cut off and replaced with a suitable plug as outlined below.

Note: The removed plug cannot be used for any other appliance and should therefore be properly disposed of and not left where children might find it and plug it into a supply socket - with the obvious consequent danger.

IF THE FITTED PLUG IS REMOVED

The flexible mains lead must be correctly connected as below, to a three pin plug of not less than 13 amp capacity. If a B.S.1363 fused plug is used, it must be fitted with a 3amp fuse which is approved to B.S.1362.

IMPORTANT: The wires in the mains lead fitted to this appliance are coloured in accordance with the following code:

GREEN and YELLOW - EARTH

 

 

BLUE - NEUTRAL

 

BROWN - LIVE

CORD CLAMP

 

3amp FUSE

As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:- The wire which is green and yellow must be connected to the terminal in the plug which is marked with the letter E or by the earth symbolor coloured green or green and yellow. The wire which is coloured blue must be connected to the terminal which is marked with the N or coloured black. The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red. When wiring the plug, ensure that all strands of wire are securely retained in each terminal. Do not forget to tighten the mains lead clamp on the plug. As the appliance must be earthed, DO NOT use 2-pin socket outlets, if you are in doubt, consult a qualified electrician.

Should the mains lead ever require replacement, it is essential that this operation be carried out by a qualified electrician and should only be replaced with a flexible cord of the same size ie. 0.75mm2 cross sectional area and temperature rating of 85° C eg. heat resisting PVC.

IF A MOULDED PLUG IS FITTED

In the event of replacing a fuse in the plug supplied a 3amp ASTA approved fuse to B.S.1362 must be fitted.

Note: The fuse cover must be refitted when changing the fuse. In the event of losing the fuse cover the plug must not be used until a replacement fuse cover has been obtained and fitted. A new fuse cover can be obtained from your local Electrical Retailer. The colour of the correct replacement fuse cover is that of the coloured marks or inserts in the base of the plug.

GB

 

7

Image 7
Contents Electric Hood Model HD90X Instructions for Installation and UseContents USE InstallationMaintenance Recommendations and SuggestionsDimensions InstallationComponents Mounting the hood body Wall drilling and bracket fixingRecirculation Version AIR Outlet Flue assemblyConnections Ducted Version AIR Exhaust SystemIf the Fitted Plug is Removed Electrical ConnectionGetting to Know Your Cooker Hood Charcoal Filter Replacing the Activated Charcoal Filter Care and CleaningLight Replacement CleaningExtended Warranties After Sales ServiceRepair Service and Information Help Desk Genuine Parts and AccessoriesSatisfaction guaranteed or your money back GuaranteeRecycling & Disposal Information Key Contacts After Sales Service

HD90X specifications

The Hotpoint HD90X is a versatile and efficient freestanding dual fuel cooker that offers an ideal solution for modern kitchens. Combining the precision of gas cooking with the reliability of electric ovens, the HD90X is specifically designed for culinary enthusiasts seeking high performance and convenience.

One of the standout features of the Hotpoint HD90X is its dual fuel functionality. This means the hob operates on gas, providing rapid heating and precise temperature control, while the ovens utilize electric power for consistent cooking results. This combination offers the best of both worlds, catering to various cooking styles whether you're simmering sauces or baking delicate pastries.

The hob of the HD90X comes equipped with a five-burner gas setup, including a powerful wok burner. This allows for fast boiling and stir-frying, making it easy to prepare multiple dishes simultaneously. The cast iron pan supports not only enhance stability for your cookware, but they also add a professional touch to the overall aesthetic.

In terms of oven capabilities, the Hotpoint HD90X features two spacious electric ovens. The main oven includes a fan-assisted function that promotes even heat distribution, ensuring all your dishes are cooked uniformly. The second oven provides additional capacity, making it convenient to handle larger meals or multiple course dinners.

The HD90X also boasts an integrated grill, perfect for achieving that golden finish on your favorite dishes. The grill function allows you to create delicious crispy toppings while keeping the interior moist.

Hotpoint has incorporated several handy technologies into the HD90X model, including the intelligent cook assistance feature. This function provides guidance on cooking times and temperatures for various dishes, taking the guesswork out of meal preparation.

Cleaning is often a concern with cookers, but the Hotpoint HD90X simplifies this with its easy-clean enamel interiors that prevent food from sticking and allow for quick wipe-downs after use.

With its combination of functionality, style, and innovation, the Hotpoint HD90X is an exceptional choice for home cooks who desire both performance and user-friendliness in their kitchen appliances. It embodies everything one would expect from a modern cooker while offering distinctive features that stand out in the marketplace.