Whirlpool RH3730 Before you start, Parts supplied, Tools and materials needed for installation

Page 2

Before you start...

Your safety and the safety of

others is very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the safety alert symbol. This symbol alerts you to potential hazards that can kill

or hurt you and others. All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING”. These words mean:

DANGER

You can be killed or seriously injured if you don’t immediately follow instructions.

WARNING

You can be killed or seriously injured if you don’t follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

Important: Observe all governing codes and ordinances.

Proper installation is your responsibility. Make sure you have everything necessary for correct installation. It is the responsibility of the installer to comply with the clearances specified.

Check the location where the range hood will be installed. The location should be away from strong draft areas, such as windows, doors, and strong heating vents.

Mobile home installation

The installation of this range hood must conform to the Manufactured Home Construction Safety Standards, Title 24 CFR, Part 328 (formerly the Federal Standard for Mobile Home Construction and Safety, Title 24, HUD, Part 280) or when such standard is not applicable, the Standard for Manufactured Home Installation

1982 (Manufactured Home Sites, Communities and Setups) ANSI A225.1/NFPA 501A*, or latest edition, or with local codes.

2

WARNING — TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:

Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable Codes and Standards, including Fire Rated Construction. Sufficient air is needed for proper combustion and exhausting of gases through the flue (chimney) of fuel burning equipment to prevent back drafting. Follow the heating equipment manufacturer’s guideline and safety standards such as those published by the National Fire Protection Association (NFPA), and the American Society of Heating Refrigeration and Air Conditioning Engineers (ASHRAE), and the local code authorities.

When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities.

Ducted fans must always be vented to the outdoors.

WARNING — To reduce the risk of fire, use only metal ductwork.

This unit must be grounded.

This hood is factory set for vented installations. For non-vented installations, purchase Filter Kit No. 883093 (includes Filter/Light Lens No. 883149 and Charcoal Filter Pads No. 883151) from your dealer.

Tools and materials needed for installation:

• flat blade

1-1/4" (3.0 cm)

screwdriver

drill bit

• pliers

• 1/8" (or 3 mm) drill

• drill

bit for pilot holes

• ruler

• pencil

For vented installations, you also need:

• compass or 8"

• duct tape

(20.3 cm) circle

• 7" (17.8 cm) round

template

damper if using

• metal snips

7" (17.8 cm) round

• keyhole saw

vent system

• saber saw

 

Cabinets with recessed bottoms:

2, 2" (5.8 cm) wide filler strips. Length and thickness determined by recess dimensions.

4 flat head wood screws or machine screws with washers and nuts to attach filler strips.

Parts supplied:

filter with built-in light lens

3-1/4" x 10" (8.3 x 25.4 cm) damper/vent connector

parts bag

Electrical requirements

Important: Observe all governing codes and ordinances.

It is the customer’s responsibility:

To contact a qualified electrical installer.

To assure that the electrical installation is adequate and in conformance with National Electrical Code, ANSI/NFPA 70

— latest edition*, or CSA Standards C22.1-94, Canadian Electrical Code, Part 1 and C22.2 No.0-M91 - latest edition** and all local codes and ordinances.

A separate ground wire must be used. It is recommended that a qualified electrician determine that the ground path is adequate.

A 120-volt, 60-Hz, AC-only, fused electrical system is required. A separate 15-amp circuit is recommended.

Do not ground to a gas pipe.

Check with a qualified electrician if you are not sure range hood is properly grounded.

Do not have a fuse in the neutral or ground circuit.

IMPORTANT:

Save Installation Instructions for electrical inspector’s use.

The range hood must be connected with copper wire only.

The range hood should be connected directly to the fused disconnect (or circuit breaker) box through flexible armored or nonmetallic sheathed copper cable. A U.L.- or C.S.A.-listed strain relief must be provided at each end of the power supply cable. Wire sizes (COPPER WIRE ONLY) and connections must conform with the rating of the appliance as specified on the model/serial rating plate.

Wire sizes must conform to the requirements of the National

Image 2
Contents Table of Contents Quick ReferenceBefore you start Tools and materials needed for installationMobile home installation Parts suppliedVertical roof venting Product dimensionsVenting requirements Recommended vent lengthRecommended standard fittings Now start4 x 10 8.3 x 25.4 cm vent system Cm vent system4 x 10 8.3 x 25.4 cm Prepare and install the hoodFor vented installations, go to a Vent systemMake electrical connection Direct wiringFollow Power Cord Kit instructions for connecting wiring For non-ventedOperating the fan Use and Care InformationOperation To turn on the lightWhirlpool Range Hood Warranty Care of range hoodRequesting Assistance or Service Our consultants provide assistance withIf you need service Listed in Check OperationSérie RH3730 Série RH3736 Consultation rapideTable des matières Avant de Commencer Outillage et matériel nécessaires pour l’installationInstallation dans une résidence mobile Dimensions du produit Le système doit décharger l’air à l’extérieurPréparation de l’emplacement de l’installation Longueur recommandée du circuit d’évacuation17,8 cm 7 po Préparation et installation de la hotteConduit d’évacuation X 25,4 cm 3 1/4 x 10 poRaccordement au réseau électrique Utilisation et entretien Commande du ventilateurCommande d’éclairage Utilisation de la hotteEntretien de la hotte Garantie Whirlpool Hotte d’extractionSi vous avez besoin de pièces de rechange Demande d’assistance ou de serviceSi vous avez besoin d’assistance ou de service aux É.-U Pour plus d’assistance« Dépannage » Si vous avez besoin d’assistance ou de service au CanadaSi vous avez besoin de service

RH3730 specifications

The Whirlpool RH3730 is a cutting-edge refrigerator that combines modern design with advanced technology, ensuring that your food stays fresh while enhancing your kitchen’s aesthetic appeal. This model is particularly known for its spacious interior, innovative features, and user-friendly controls.

One of the standout features of the RH3730 is its spacious capacity, which allows for easy organization of groceries and other food items. With adjustable shelves and bins, users can customize the internal layout to accommodate various sizes of items, from tall bottles to snack containers. The refrigerator also includes a dedicated crisper drawer that helps keep fruits and vegetables fresh longer by maintaining optimal humidity levels.

The Whirlpool RH3730 is equipped with advanced cooling technologies, such as Adaptive Defrost, which monitors the refrigerator’s usage patterns and adjusts the defrost cycle accordingly. This not only helps in energy efficiency but also keeps your food safe from temperature fluctuations. The refrigerator also employs a unique air filtration system that minimizes odors, ensuring that each item retains its original flavor.

For those concerned about sustainability and energy consumption, the RH3730 features an Energy Star certification. This means it meets strict energy efficiency guidelines set by the U.S. Environmental Protection Agency, helping you save on electricity bills while minimizing your carbon footprint.

In terms of convenience, the RH3730 comes with smart features that integrate seamlessly with modern lifestyles. It includes a user-friendly control panel, allowing you to adjust temperatures and settings effortlessly. Additionally, some models may come with a smartphone app that enables you to monitor and control the refrigerator remotely, ensuring you never have to worry about food spoilage when you are away from home.

In conclusion, the Whirlpool RH3730 is a versatile and efficient refrigerator that stands out due to its spacious design, advanced cooling technologies, and energy efficiency. With features aimed at optimizing food preservation and enhancing user convenience, this model is an excellent choice for anyone seeking a reliable and stylish appliance for their kitchen. Whether you’re an avid cook or someone who values convenience, the RH3730 is designed to meet your needs while keeping your food fresher for longer.