Hotpoint FF46TP, FF48TX manual Start-up and use, Starting the appliance, Navigating the display

Page 7

Start-up and use

Starting the appliance

!After transportation of the appliance, carefully place it in an upright position and wait at least 3 hours before connecting it to the electricity mains, to make sure it operates as it should.

• Clean the inside of the refrigerator well using warm water and bicarbonate of soda before placing food inside it.

• The appliance comes with a motor protection control system which makes the compressor start approximately 8 minutes after being switched on. The compressor also starts each time the power supply is cut off whether voluntarily or involuntarily (blackout).

Freezer Compartment

When the product is switched on (the ON/OFF button is pressed for more than two seconds) the freezer compartment is set to its default value of -18°C. We recommend that the SUPER FREEZE function is set (the freezer display shows the text “SF”) in order to accelerate the cooling process of the compartment; when the inside of the compartment has reached its optimal temperature the function will be deactivated and the food may be placed inside.

Refrigerator Compartment

When the appliance is switched on the refrigerator compartment is set to its default value of +5°C. We recommend that the SUPER COOL function is set (the refrigerator display shows the text “SC”) in order to accelerate the cooling process of the compartment. After a few hours it will be cool enough for food to be placed inside.

Navigating the display

Setting the temperatures:

If the product is switched on, the refrigerator and freezer displays will indicate the temperatures set at that moment. To change them, simply press the + and - buttons corresponding to the compartment for which you wish to change the set temperature. To be specific, each time one of the buttons is pressed the temperature is increased or decreased by 1°, and the number of illuminated horizontal bars is adjusted accordingly. The temperature values that may be selected for the refrigerator compartment are +8°C, +7°C, +6°C, +5°C, +4°C, +3°C and +2°C, while the values that may be set for the freezer are -18°C, -19°C, -120°C, - 21°C, -22°C, -24°C and -26°C.

The temperatures are automatically set to +5°C for the refrigerator compartment and -18°Cfor the freezer compartment (these are standard food storage values). When the “I Care” function is active, the appliance automatically adjusts the temperatures according to the conditions inside and outside the refrigerator; the operation

of this function is signalled by the text “AUTO”.

Whenever it is necessary to activate the “I Care” function at GB temperatures that are different to the standard storage

values, the “I Care” button must be pressed as soon as the function is activated and held down while the new temperatures are set using the + and - buttons. Under these conditions, the temperatures may be set to 4°C, 5°C and 6°C for the refrigerator compartment and -18°C, -19°C and - 20°C for the freezer compartment.

When the HOLIDAY function is active the temperature may not be adjusted, however the appliance adjusts itself automatically so that the optimal settings for the situation are used: +12°C for the refrigerator compartment and -18°Cfor the freezer compartment. This function is indicated by the text.

To activate and deactivate the functions simply press the relevant button and the function status will be signalled by the corresponding LED switching on or off.

Several functions (SUPER COOL, SUPER FREEZE, ICE PARTY, I CARE) are incompatible with others (HOLIDAY,...); remember that there is a pre-set order of priority which will help you to use the product in the best possible way.

When the Ice Party function has finished, press the ICE PARTY button to stop the relevant LED from flashing. This flashing indicates that the function is complete and that the bottle should be removed from the freezer compartment.

Child Lock

To enable the Child Lock function, the ALARM button must be pressed for 2 seconds; the button lock activation is confirmed by a short beep and the text “LO” “CH” appears on the refrigerator and freezer displays. This text is then replaced by the refrigerator and freezer temperatures set prior to when the child lock function was enabled.

To deactivate the function, press the ALARM button or 2 seconds; deactivation will be confirmed by a short beep and the text “CH” “OF” will appear on the refrigerator and freezer displays for 1 second.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Operating Instructions Positioning and connection InstallationThis Appliance Must be Earthed Disposing of the plug Reversible doorsControl panel Description of the applianceOverall view Refrigerator compartment Freezer compartment AccessoriesICE Care tray Starting the appliance Start-up and useNavigating the display Ever GB Chiller systemFresh Ever Fresh containers Using Ever Fresh to its full potentialUsing the refrigerator to its full potential Vacuum storageUsing the freezer to its full potential Maintenance and care Respecting and conserving the environment Precautions and tipsGeneral safety DisposalMalfunctions Possible causes / Solutions Troubleshooting AssistanceGuarantee After Sales Service 195060546.00

FF46TP, FF48TX specifications

The Hotpoint FF48TX and FF46TP are two impressive freestanding fridge-freezer models that blend modern design with functionality. Ideal for family kitchens, these appliances not only provide ample storage but also incorporate advanced technologies that enhance food preservation and energy efficiency.

One of the standout features of both the FF48TX and FF46TP is their generous capacity. The FF48TX offers an abundance of storage space with a total capacity of around 320 liters, including 215 liters for the fridge and 105 liters for the freezer. Similarly, the FF46TP provides substantial storage but in a slightly different configuration, making it versatile for various kitchen layouts. The large fridge compartments are equipped with adjustable shelves, allowing users to customize storage according to their needs. The freezer section includes drawers designed for easy access and organization of frozen foods.

Energy efficiency is a crucial consideration in modern appliances, and both models excel in this area. They are rated A+ for energy efficiency, ensuring lower energy bills while minimizing their environmental impact. This makes them an excellent choice for eco-conscious consumers seeking to reduce their carbon footprint without compromising on performance.

Another important technology featured in these models is the No Frost system, which prevents the build-up of ice in the freezer. This helps maintain optimal conditions for frozen foods and eliminates the need for manual defrosting, saving time and effort. The FF48TX and FF46TP also include a multi-airflow system designed to evenly distribute cold air, ensuring consistent temperatures throughout the fridge. This feature helps to preserve the freshness of fruits, vegetables, and other perishables, prolonging their shelf life.

Both fridge-freezers also come with advanced control options, including temperature settings that can be easily adjusted through the user-friendly interface. Additionally, their modern aesthetic, available in a range of colors, allows them to seamlessly integrate into any kitchen decor, providing a stylish yet practical solution for food storage.

In summary, the Hotpoint FF48TX and FF46TP are standout choices for anyone in need of a reliable and efficient fridge-freezer. With their spacious interiors, energy-saving technologies, and user-friendly features, these models exemplify the ideal marriage of form and function in modern kitchen appliances. Whether you're a busy family or just someone who loves cooking, these appliances will cater to your needs while enhancing your kitchen experience.
Top Page Image Contents