Hotpoint FF47MX manual Start-up and use, Starting the appliance, Navigating the display

Page 7

Start-up and use

Starting the appliance

!After transportation of the appliance, carefully place it in an upright position and wait at least 3 hours before connecting it to the electricity mains, to make sure it operates as it should.

• Clean the inside of the refrigerator well using warm water and bicarbonate of soda before placing food inside it.

• The appliance comes with a motor protection control system which makes the compressor start approximately 8 minutes after being switched on. The compressor also starts each time the power supply is cut off whether voluntarily or involuntarily (blackout).

Freezer Compartment

When the product is switched on (the ON/OFF button is pressed for more than two seconds) the freezer compartment is set to its default value of -18°C. We recommend that the SUPER FREEZE function is set (the freezer status bar continues to display the set value) in order to accelerate the cooling process of the compartment; when the inside of the compartment has reached its optimal temperature the function will be deactivated and the food may be placed inside.

Refrigerator Compartment

When the appliance is switched on the refrigerator compartment is set to its default value of +5°C. We recommend that the SUPER COOL function is set (the refrigerator status bar continues to display the set value) in order to accelerate the cooling process of the compartment. After a few hours it will be cool enough for food to be placed inside.

Navigating the display

Setting the temperatures:

If the product is switched on, the refrigerator and freezer status bars will indicate the temperatures set at that moment. To change them, simply press the and buttons corresponding to the compartment for which you wish to change the set temperature. More specifically, each time one of the buttons is pressed the temperature is increased or decreased by 1°, and the level of cold is adjusted accordingly.The temperature values that may be selected for the refrigerator compartment are +12°C, +7°C, +6°C, +5°C, +4°C, +3°C and +2°C, while the values that may be set for the freezer are -18°C, -19°C, -120°C, -21°C, -22°C, -24°C and -26°C.

The temperatures are automatically set to +5°C for the

 

GB

refrigerator compartment and -18°Cfor the freezer

 

compartment (these are standard food storage values.

 

 

When the “I Care” function is active, the appliance

 

automatically adjusts the temperatures according to the

 

conditions inside and outside the refrigerator; the operation

 

of this function is signalled by the text “AUTO”.

 

Whenever it is necessary to activate the “I Care” function at

 

temperatures that are different to the standard storage

 

values, the “I Care” button must be pressed as soon as the

 

function is activated and held down while the new

 

temperatures are set using the

and buttons. Under

 

these conditions, the temperatures may be set to 4°C, 5°C and 6°C for the refrigerator compartment and -18°C, -19°C and -20°C for the freezer compartment.

When the HOLIDAY function is active the temperature may not be adjusted, however the appliance adjusts itself automatically so that the optimal settings for the situation are used: +12°C for the refrigerator compartment and -18°Cfor the freezer compartment. This function is indicated by the text.

To activate and deactivate the functions simply press the relevant button and the function status will be signalled by the corresponding LED switching on or off.

Several functions (SUPER COOL, SUPER FREEZE, ICE PARTY, I CARE) are incompatible with others (HOLIDAY,...); remember that there is a pre-set order of priority which will help you to use the product in the best possible way.

When the Ice Party function has finished, press the ICE PARTY button to stop the corresponding LED from flashing and to silence the sound signal. This flashing and sound signal indicates that the function is complete and that the bottle should be removed from the freezer compartment.

Child Lock

In order to activate the Child Lock function, the Child Lock button must be pressed for 2 seconds; the activation of the button lock is confirmed by a short beep and the illumination of the corresponding LED.

To deactivate the function, press the Child Lock button for 2 seconds; deactivation will be confirmed by a short beep and by the corresponding LED switching off.

!The FREEZER status bar is also used to indicate an unusual temperature increase in the freezer compartment (see Troubleshooting).

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Operating Instructions Positioning and connection InstallationGreen and Yellow Earth Blue Neutral Brown Live Connect Green and Yellow wire to terminal markedReversible doors Disposing of the plugControl panel Description ApplianceOverall view Refrigerator compartment Freezer compartment AccessoriesICE tray Starting the appliance Start-up and useNavigating the display No Frost Using the refrigerator to its full potentialUsing the freezer to its full potential Chiller systemMaintenance and care Respecting and conserving the environment Precautions and tipsGeneral safety DisposalMalfunctions Possible causes / Solutions TroubleshootingGuarantee After Sales Service Page Page 195060527.00

FF47MX specifications

The Hotpoint FF47MX is a modern refrigerator freezer designed to blend style and functionality, making it an essential appliance for contemporary kitchens. This unit is characterized by its energy-efficient performance and spacious capacity, ensuring that families can store ample food while maintaining energy savings.

One of the standout features of the FF47MX is its impressive storage capacity, which offers a generous combined volume of approximately 365 liters. This includes a spacious refrigeration section and a sizable freezer, making it easy for users to organize groceries, leftovers, and frozen goods. The adjustable shelves in the fridge allow customization for larger items or bulk purchases, while the dedicated salad crisper drawer is designed to maintain optimal humidity levels, keeping fruits and vegetables fresh for longer.

The FF47MX incorporates cutting-edge technologies like No Frost and Active Fresh technology. The No Frost system prevents ice build-up in the freezer, eliminating the need for manual defrosting, while ensuring even temperature distribution. Active Fresh technology helps maintain an ideal environment within the refrigerator, preserving the quality and flavor of food.

Additionally, the Energy Rating of the unit plays a crucial role in its appeal, as the FF47MX is designed to operate efficiently, helping users save on energy bills while reducing their carbon footprint. The advanced cooling system also contributes to quieter operation, ensuring that this refrigerator freezer fits seamlessly into any home without excessive noise.

The exterior of the Hotpoint FF47MX is sleek and modern, with a stylish metallic finish that not only looks great but is also easy to clean. The appliance features ergonomically designed handles for comfortable and convenient access.

This model also comes with a range of helpful safety and convenience features, including adjustable temperature controls, interior LED lighting, and a clear view of the contents, allowing users to quickly find what they need without rummaging around.

Overall, the Hotpoint FF47MX combines advanced technology with user-friendly features and a stylish design, making it an ideal choice for those seeking durability and efficiency in a refrigerator freezer. Whether you are a busy family or an individual who enjoys gourmet cooking, the FF47MX is built to meet various storage needs while enhancing your kitchen's aesthetic appeal.
Top Page Image Contents