Hotpoint FF4D SB manual Precautions and tips, General safety, Disposal

Page 9

Precautions and tips

!The appliance was designed and manufactured in compliance with international safety standards. The following warnings are provided for safety reasons and must be read carefully.

This appliance complies with the following

Community Directives:

-73/23/EEC of 19/02/73 (Low Voltage) and subsequent amendments; -89/336/EEC of 03.05.89 (Electromagnetic

Compatibility) and subsequent amendments; - 2002/96/CE..

General safety

The appliance was designed for domestic use inside the home and is not intended for commercial or industrial use.

The appliance must be used to store and freeze food products by adults only and according to the instructions in this manual.

The appliance must not be installed outdoors, even in covered areas. It is extremely dangerous to leave the appliance exposed to rain and storms.

Do not touch the appliance with bare feet or with wet or moist hands and feet.

Do not touch the internal cooling elements: this could cause skin abrasions or frost/freezer burns.

When unplugging the appliance always pull the plug from the mains socket, do not pull on the cable.

Before cleaning and maintenance, always switch off the appliance and disconnect it from the electrical supply. It is not sufficient to set the temperature adjustment knobs on OFF (appliance off) to eliminate all electrical contact.

In the case of a malfunction, under no circumstances should you attempt to repair the appliance yourself. Repairs carried out by inexperienced persons may cause injury or further malfunctioning of the appliance.

Do not use utensils other than the scraper provided, or electrical equipment which is not of the type specified by the manufacturer, inside the frozen food storage compartments.

Do not put ice cubes taken directly from the freezer into your mouth.

Do not allow children to tamper with the controls or play with the appliance. Under no circumstance should they be allowed to sit on the bins or to hang from the door.

Keep packaging material out of the reach of children! It can become a choking or suffocation hazard.

When closing the refrigerator doors, pay attention to the position of the upright (see figure).

Make sure that excessive

volumes of food are not placed in the upper part of the freezer compartment, in the space reserved for the ice tray (where present).

Disposal

GB

Observe local environmental standards when disposing packaging material for recycling purposes.

The European Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimise the recovery and recycling of the materials they contain and reduce the impact on human health and the environment. The crossed out “wheeled bin” symbol on the product reminds you of your obligation, that when you dispose of the appliance it must be separately collected. Consumers should contact their local authority or retailer for information concerning the correct disposal of their old appliance.

Respecting and conserving the environment

Install the appliance in a fresh and well-ventilated room. Ensure that it is protected from direct sunlight and do not place it near heat sources.

Try to avoid keeping the door open for long periods or opening the door too frequently in order to conserve energy.

Do not fill the appliance with too much food:

cold air must circulate freely for food to be preserved properly. If circulation is impeded, the compressor will work continuously.

Do not place hot food directly into the refrigerator. The internal temperature will increase and force the compressor to work harder and will consume more energy.

Defrost the appliance if ice forms (see Maintenance). A thick layer of ice makes cold transference to food products more difficult and results in increased energy consumption.

Regularly check the door seals and wipe clean to ensure they are free of debris and to prevent cold air from escaping (see Maintenance).

9

Image 9
Contents REFRIGERATOR/FREEZER Combination Operating InstructionsInstallation Positioning and connectionThis Appliance Must be Earthed Disposing of the plug GB Control panel Description of the applianceShelves Overall viewCan Rack LampStart-up and use Using the refrigerator to its full potentialStarting the appliance Chiller systemICE Device Using the freezer to its full potentialMaintenance and care General safety Precautions and tipsDisposal Respecting and conserving the environmentMalfunctions Possible causes / Solutions TroubleshootingGuarantee After Sales Service

FF4D SB specifications

The Hotpoint FF4D SB is a standout appliance in the realm of modern refrigeration, combining functionality, style, and innovative technologies to meet the demands of today’s households. This freestanding fridge freezer is designed with an emphasis on efficiency and user convenience, making it an attractive choice for families and individuals alike.

One of the main features of the Hotpoint FF4D SB is its generous storage capacity. With a total volume of around 340 liters, it offers ample space to store fresh produce, beverages, and frozen goods. The fridge compartment typically includes adjustable shelves, allowing users to customize their storage options based on their needs. In addition, the dedicated salad crisper drawer helps keep fruits and vegetables fresher for longer by maintaining optimal humidity levels.

The freezer section of the FF4D SB provides handy storage options, often featuring clear fronted drawers to give quick visibility of the contents. With the ability to quickly freeze food items, this model is particularly useful for those who like to shop in bulk or prepare meals in advance.

In terms of technology, the Hotpoint FF4D SB incorporates the advanced Total No Frost system. This innovative feature eliminates the need for manual defrosting, ensuring that both the fridge and freezer compartments maintain a consistent temperature and humidity level. This not only saves time but also helps in preventing ice build-up, maximizing storage efficiency.

Energy efficiency is another key characteristic of the Hotpoint FF4D SB. Boasting a high energy rating, this model is designed to minimize power consumption, making it an environmentally-friendly option. By utilizing energy-saving technologies, it allows consumers to keep their electricity bills in check while reducing their carbon footprint.

Additionally, this appliance often includes a useful temperature control feature, allowing users to adjust the internal temperature of the fridge and freezer compartments independently. The LED lighting provides excellent visibility throughout, illuminating every corner without generating excess heat that could affect food preservation.

Overall, the Hotpoint FF4D SB stands as a reliable and stylish addition to any kitchen. Its combination of spacious storage capacity, advanced cooling technologies, and energy efficiency make it an ideal choice for anyone seeking a balance of practicality and modern design in a refrigerator.