Hotpoint HT303 manual Replacing fuse covers, Replacement fuse covers, Disposing of the plug

Page 4

ELECTRICAL CONNECTION

Your appliance is supplied with a 13amp fused plug that can be plugged into a 13amp socket for immediate use. Before using the appliance please read the instructions below.

WARNING:

THIS APPLIANCE MUST BE EARTHED.

Replacing fuse covers:

When replacing a faulty fuse, a 13amp ASTA approved fuse to BS 1362 should always be used and the fuse cover re-fitted.

If the fuse cover is lost, the plug must not be used until a replacement is obtained.

Replacement fuse covers:

If a replacement fuse cover is fitted, it must be of the correct colour as indicated by the coloured marking or the colour that is embossed in words on the base of the plug.

Changing the plug:

Removing the plug

If your appliance has a non-rewireable moulded plug and you should wish to remove it to add a longer cable or to re-route the mains cable through partitions, units etc. please ensure that either:

- The plug is replaced by a fused 13amp re- wireable plug bearing the BSI mark of approval.

or

-The mains cable is wired directly into a 13amp cable outlet, controlled by a switch (in compliance with BS 5733) which is accessible without moving the appliance.

Disposing of the plug

Cut off and dispose of the supplied plug if it does not fit your socket. The cable should be cut as close as possible to the moulded plug.

Remove the fuse.

WARNING:

To avoid a shock hazard do not insert the discarded plug into a socket anywhere else.

Fitting a new plug

IMPORTANT:

WIRES IN THE MAINS LEAD ARE COLOURED IN

ACCORDANCE WITH THE FOLLOWING CODE...

Green and Yellow

-

Earth

Blue

-

Neutral

Brown

-

Live

As the colours of the wires in the mains lead may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

-Connect Green and Yellow wire to terminal marked 'E' or or coloured Green and Yellow.

-Connect Brown wire to terminal marked 'L' or coloured red or brown.

-Connect Blue wire to terminal marked 'N' or coloured Black or Blue.

If a 13amp plug (BS 1363) is used it must be fitted with a 13amp fuse. A 15amp plug must be protected by a 15amp fuse, either in the plug or adaptor or at the distribution board.

If you are in any doubt about the electrical supply to your machine, consult a qualified electrician before use.

CE Marking certifies that this appliance conforms to the following EEC directives :

Low Voltage Equipment - 73/23/EEC & 93/68 EEC

Electromagnetic Compatibility 89/336/EEC, 92/31/EEC & 93/68/EEC

GB

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Instructions for Installation and Use Contents Product Safety InstallationReplacement fuse covers Replacing fuse coversChanging the plug Removing the plug Disposing of the plugTemperature knob for regulating the temperature GET to Know Your ApplianceHow to use the refrigerator compartment Getting Your Appliance Ready for USEFreezing Food What Not to Store in the RefrigeratorCorrect Temperature Settings Energy Saving TipsFood Storage Meat and FishFruits and Vegetables Caring for Your Appliance DefrostingTroubleshooting Page Genuine Parts and AccessoriesUK 08709 077 Repair Service and Information Help DeskExtended Warranties Guarantee terms and conditions Satisfaction guaranteed or your money backMachine or, if you prefer, give you your money back Repair Service and Information Desk Genuine Parts and Accessories

HT303 specifications

The Hotpoint HT303 is a versatile and efficient hot water system designed for modern homes. This unit stands out with its range of advanced features and innovative technologies, making it a popular choice among homeowners seeking reliability and performance in their hot water solutions.

One of the standout characteristics of the Hotpoint HT303 is its energy efficiency. The appliance is designed to minimize energy consumption while delivering consistent hot water supply, helping users save on utility bills without sacrificing performance. With its high energy efficiency rating, the HT303 significantly contributes to reducing the overall carbon footprint, making it an environmentally-friendly option.

The HT303 is equipped with a user-friendly digital control panel, allowing for easy temperature adjustments and monitoring. This feature provides homeowners with the flexibility to set their preferred water temperature, ensuring comfort and convenience in daily use. Additionally, the digital controls often come with programmable timers, allowing users to set specific heating schedules based on their household needs.

Safety is a priority with the Hotpoint HT303. It includes several critical safety features, such as a temperature limit control to prevent overheating and an automatic shut-off mechanism that activates in case of malfunctions. These safety measures ensure peace of mind for users, knowing that their hot water system operates safely and efficiently.

Another notable aspect of the HT303 is its compact design, making it suitable for various installation spaces. Its sleek and modern aesthetic also allows it to seamlessly blend into different home environments. Furthermore, the unit is built with durable materials, designed to withstand everyday wear and tear, and offer long-lasting performance.

The Hotpoint HT303 also incorporates advanced heating technologies that provide quick heating capabilities. This means users can enjoy hot water on demand without long waiting times, enhancing the overall convenience of the appliance. The heating system is optimized for fast recovery rates, ensuring that the household’s hot water needs are promptly met.

Overall, the Hotpoint HT303 offers a combination of efficiency, safety, and modern technology, making it an excellent choice for homeowners looking for a reliable hot water system. Its user-friendly features, compact design, and energy-efficient operation make it a top contender in the market, ensuring comfort and satisfaction for years to come.
Top Page Image Contents